824 Wheel Dozer

Caterpillar

824 Wheel Dozer

رقم القطعة: CAT-123800

لا يعرض أي بائع سعرًا لهذا المنتج بعد. أرسل طلبك وسنعود إليك بأفضل عرض.

اطلب عرض سعر

يكتمل الطلب في تطبيق Ohmva بعد تسجيل الدخول.

الوصف

824 Wheel Dozer

المواصفات

Engine ModelCat® C15
Gross Power - SAE J1995:2014324 kW
Net Power - SAE J1349:2011302 kW
Bore137.2 mm
Stroke171.4 mm
Displacement15.2 l
Note (1)Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Note (2)Two engine emission configurations are available. One meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emissions standards. The other meets Brazil MAR-1 emission standards, emitting equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
كل المواصفات (127)
Note (3)The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Forward - 16.1 km/h
Note (4)The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Forward - 211.1 km/h
Note (5)Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Forward - 319.6 km/h
Forward - 434.8 km/h
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 2 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes (3.15 tons).
Reverse - 17 km/h
Fuel Tank782 l
Cooling System116 l
Reverse - 212.6 km/h
Engine Crankcase34 l
Transmission66 l
BrakesMulti-disc wet (enclosed) 4 WHL
Model824
Product Pagehttps://www.cat.com/en_US/products/new/equipment/dozers/wheel-dozers/123800.html
Caterpillar CategoryWheel Dozers
Caterpillar Category PathProducts > Equipment > Dozers > Wheel Dozers > 824
Caterpillar Product Familyequipment
Caterpillar Product Page ID123800
FrontPlanetary – Fixed
Height1230 mm
Dig Depth448 mm
Rated Speed1800 r/min
Ground Clearance534.4 mm
Engine Power - ISO 14396:2002318 kW
Wheel Base3700 mm
Parking BrakeDrum and shoe, spring applied, hydraulic released
Torque Rise33%
Height - Top of Cab4100 mm
Service Refill Capacities — Note (1)All nonroad Tier 4 Final, EU Stage V, and Japan 2014 (Tier 4 Final) diesel engines are required to use: – Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. – Cat engines are compatible with the following renewable, alternative, and biodiesel* fuels that reduce greenhouse gases***: • Up to B20 biodiesel (FAME)** • Up to 100% HVO and GTL renewable fuels – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Diesel exhaust fluid (DEF) that meets all requirements defined in ISO 22241-1:2006. * Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. ** Engines with aftertreatment devices can use up to B20. Engines with no aftertreatment devices can use higher blends, up to B100. *** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
Reverse - 322.4 km/h
Reverse - 439.7 km/h
Transmission TypeCat planetary - powershift - ECPC
RearPlanetary – Oscillating
Differential - Final Drives - Rear110 l
Differential - Final Drives - Front100 l
Height - Top of Hood3204 mm
Cylinders, Double Acting - Lift, Bore and Stroke120 mm × 1070 mm (4.7 in × 42.1 in)
Steering System - CircuitPilot operated, load sensing
Steering System - PumpVariable displacement piston
Relief Valve Setting - Steering24000 kPa
Oscillation Angle±11°
Operator Sound Pressure Level (ISO 6396:2008)72 dB(A)
Machine Sound Power Level (ISO 6395:2008)110 dB(A)
Sound Performance - Tier 4 Final / Stage V — Note (1)* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Sound Performance - Tier 4 Final / Stage V — Note (2)** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701
Sound Performance - Tier 3 / Stage IIIA — Note (1)* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Sound Performance - Tier 3 / Stage IIIA — Note (2)** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only)32 l
Hydraulic System - Implement/Steering214 l
Net Power - ISO 9249:2007302 kW
Peak Net Torque (1,300 rpm)2005 N·m
Maximum Altitude without Derating (U.S. EPA Tier 4 Final/EU Stage V)2834 m
Maximum Altitude without Derating (U.S. EPA Tier 3/EU Stage IIIA)2773 m
High Idle Speed2300 r/min
Low Idle Speed800 r/min
Operating Weight – Straight Blade (Tier 4 Final/Stage V)34004 kg
Blade Capacity Range5.1-16.2 m3 (6.6-21.2 yd3)
Pump Flow at 1,800 rpm117 L/min
Height - Top of Exhaust Stack4332 mm
Main Relief Pressure26000 kPa
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke140 mm × 230 mm (5.5 in × 9.1 in)
Maximum Supply Pressure24100 kPa
Ground Clearance - Bumper852 mm
Hydraulic System - Steering — Bore114.3 mm
Centerline of Rear Axle to Edge of Bumper2830 mm
Hydraulic System - Steering — Stroke576 mm
Centerline of Front Axle to Hitch1850 mm
Max Flow at 1,800 rpm170 L/min
Hydraulic Tank Only134 l
Vehicle Articulation Angle86°
Height to Top of Beacon4422 mm
Length - With Blade on Ground - Straight Blade8422 mm
Ground Clearance to Trunnion441.4 mm
Width Over Guardrails3336 mm
Capacity5 m³
Width Over End Bits4507 mm
Straight Blade — Ground Clearance1057 mm
Maximum Tilt1167 mm
Turning Radius – Outside Corner of Blade7227 mm
Turning Radius – Inside Corner of Blade3093 mm
Coal Blade — Capacity16.2 m³
Straight Push Plate Blade — Ground Clearance1057 mm
Straight Push Plate Blade — Turning Radius – Outside Corner of Blade7099 mm
Coal Blade — Height1745 mm
Straight Push Plate Blade — Turning Radius – Inside Corner of Blade3120 mm
Coal Blade — Dig Depth472 mm
Semi-Universal Blade — Capacity7.7 m³
Coal Blade — Ground Clearance1072 mm
Semi-Universal Blade — Width Over End Bits4421 mm
Coal Blade — Maximum Tilt1242 mm
Semi-Universal Blade — Height1551 mm
Coal Blade — Turning Radius – Outside Corner of Blade7590 mm
Semi-Universal Blade — Dig Depth477 mm
Coal Blade — Turning Radius – Inside Corner of Blade3496 mm
Semi-Universal Blade — Ground Clearance1068 mm
Semi-Universal Blade — Maximum Tilt1120 mm
Semi-Universal Blade — Turning Radius – Outside Corner of Blade7260 mm
Semi-Universal Blade — Turning Radius – Inside Corner of Blade3313 mm
Universal Blade — Capacity7.7 m³
Universal Blade — Width Over End Bits4352 mm
Universal Blade — Height1350 mm
Universal Blade — Dig Depth461 mm
Universal Blade — Ground Clearance1051 mm
Universal Blade — Maximum Tilt1132 mm
Universal Blade — Turning Radius – Outside Corner of Blade7299 mm
Universal Blade — Turning Radius – Inside Corner of Blade3468 mm
Coal Blade — Width Over End Bits4798 mm
Extended Wear Blade — Capacity8.1 m³
Extended Wear Blade — Width Over End Bits4357 mm
Extended Wear Blade — Height1350 mm
Extended Wear Blade — Dig Depth461 mm
Extended Wear Blade — Ground Clearance1051 mm
Extended Wear Blade — Maximum Tilt1132 mm
Extended Wear Blade — Turning Radius – Outside Corner of Blade7296 mm
Extended Wear Blade — Turning Radius – Inside Corner of Blade3475 mm
Datasheet URLhttps://s7d2.scene7.com/is/content/Caterpillar/CM20250325-91ebe-1acb3

منتجات مشابهة

معدات ثقيلة وآليات

السعر عند الطلب

اطلب عرض سعر