Caterpillar

D2 Dozer

Name: D2 Dozer
Brand: Caterpillar
SKU: CAT-106080

رقم القطعة: CAT-106080

لا يعرض أي بائع سعرًا لهذا المنتج بعد. أرسل طلبك وسنعود إليك بأفضل عرض.

اطلب عرض سعر

يكتمل الطلب في تطبيق Ohmva بعد تسجيل الدخول.

الوصف

D2 Dozer

المواصفات

Engine Model	Cat® C3.6
Displacement	3.6 l
Note (1)	Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the ﬂywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Note (2)	All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf (Europe). See label or instruction manual for gas refrigerant identification. If machine is equipped with R134a (Global Warming Potential = 1430), the system contains 1.8 kg (4 lbs) of refrigerant, which has a CO2 equivalent of 2.574 metric tonnes (2.873 tons). If machine is equipped with R1234yf (Global Warming Potential = 0.501), the system contains 1.7 kg (3.75 lbs) of refrigerant, which has a CO2 equivalent of less than 0.001 metric tonnes (0.001 tons).
Note	Abrasion Undercarriage
Fuel Tank	195 l
Cooling System	19 l

كل المواصفات (112)

Model	D2
Product Page	https://www.cat.com/en_US/products/new/equipment/dozers/small-dozers/106080.html
Caterpillar Category	Small Dozers
Caterpillar Category Path	Products > Equipment > Dozers > Small Dozers > D2
Caterpillar Product Family	equipment
Type	Parallelogram
Caterpillar Product Page ID	106080
Height	165 mm
Operating Weight	8338 kg
Diesel Exhaust Fluid (DEF) Tank	19 l
Weights — Note (1)	Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Weights — Note (2)	For machine with ripper, add 554 kg (1,222 lb).
Ground Pressure	39.5 kPa
Number of Rollers - Each Side	7
Maximum Digging Depth	337.5 mm
Track Gauge	1550 mm
Dimensions — Note	With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
Speed	Variable
Throat Clearance	171.5 mm
Pump Output*	65 L/min
ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 Level II
Overall Width	709 mm
Power - Net	68.8 kW
Net Power - 2,200 rpm - SAE J1349	68.8 kW
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269	68.8 kW
Operating Weight - LGP	8648 kg
Drive Pumps	1
Maximum Travel Speed - Reverse	10 km/h
Relief Valve Settings	48500 kPa
Maximum Travel Speed - Forward	9 km/h
Track Motors	2
Hydraulic Controls — Relief Valve Settings	20600 kPa
Number of Shanks	3
Weight	554 kg
Maximum Ground Clearance Under Tip	448 mm
Maximum Reach - Ground Line	766 mm
Power Train	Hydrostatic
Length - Track on Ground - LGP	2248 mm
Shoe Width - Standard	460 mm
Track Gauge - LGP	1725 mm
Ground Pressure - LGP	29.7 kPa
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage	43
Shoe Width - LGP	635 mm
Number of Shoes - Each Side - Abrasion Undercarriage	38
Length of Track on Ground	2248 mm
Final Drive - Each - LGP	10 l
Crankcase - With Filter	10.5 l
Transmission - Hydraulic Tank	90 l
Final Drives - Each Side	10 l
BLADE: Blade Capacity (SAE) - LGP	1.85 m³
BLADE: Blade Width - LGP	3149 mm
BLADE: Digging Depth - LGP	589 mm
BLADE: Blade Cutting Edge Angle, Adjustable - LGP	52° to 58°
BLADE: Blade Width at Maximum Angle - LGP	2874 mm
BLADE: Blade Lift Height - LGP	708 mm
BLADE: Maximum Tilt - LGP	438 mm
Ground Clearance - LGP	332 mm
BLADE: Blade Height - LGP	910 mm
Overall Length - With Blade - LGP	4272 mm
BLADE: Maximum Angle (either side) - LGP	25°
Length of Basic Dozer (without blade) - Standard	3290 mm
Length of Basic Dozer (without blade) - LGP	3290 mm
Dozer Height - Standard	2765 mm
Width of Dozer (standard shoes, no blade) - Standard	2010 mm
Width of Dozer (standard shoes, no blade) - LGP	2360 mm
Dozer Height - LGP	2765 mm
BLADE: Maximum Angle (either side) - Standard	25°
BLADE: Blade Capacity (SAE) - Standard	1.98 m³
BLADE: Blade Width at Maximum Angle - Standard	2542 mm
Ground Clearance - Standard	332 mm
Track Gauge - Standard	1550 mm
BLADE: Digging Depth - Standard	593 mm
Overall Length - With Blade - Standard	4281 mm
BLADE: Blade Lift Height - Standard	743 mm
BLADE: Blade Width - Standard	2782 mm
BLADE: Blade Cutting Edge Angle, Adjustable - Standard	52° to 58°
BLADE: Blade Height - Standard	1010 mm
BLADE: Maximum Tilt - Standard	387 mm
Maximum Line Pull - Bare Drum	14583 kg
Maximum Line Speed - Full Drum	24 m/min
Retrieval Winch — Weight	794 kg
Control	Hydraulic
Maximum Line Speed - Bare Drum	15 m/min
Maximum Line Pull - Full Drum	9231 kg
Rope Diameter - Optional	19 mm
Drum Capacity - Recommended Cable	84 m
Drum Capacity - Optional Cable	59 m
Rope Diameter - Recommended	16 mm
Winch Drive	Hydrostatic
Drum Diameter	254 mm
Winch Length	705 mm
Drum Width	274 mm
Maximum line pull – bare drum	18144 kg
High Performance Winch — Weight	610 kg
Rope diameter – optional	19 mm
Drum capacity – recommended cable	113 m
Maximum line speed – bare drum	40 m/min
Maximum line speed – full drum	63 m/min
High Performance Winch — Overall width	741 mm
Drum capacity – optional	78 m
Rope diameter – recommended	16 mm
Maximum line pull – full drum	11340 kg
Datasheet URL	https://s7d2.scene7.com/is/content/Caterpillar/CM20200806-a7c6c-4ed2c