D3 Track-Type Tractor
رقم القطعة: CAT-106100
لا يعرض أي بائع سعرًا لهذا المنتج بعد. أرسل طلبك وسنعود إليك بأفضل عرض.
يكتمل الطلب في تطبيق Ohmva بعد تسجيل الدخول.
الوصف
D3 Track-Type Tractor
المواصفات
| Engine Model | Cat® C3.6 |
|---|---|
| Displacement | 3.6 l |
| Note (1) | Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. |
| Note (2) | All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf (Europe). See label or instruction manual for gas refrigerant identification. If machine is equipped with R134a (Global Warming Potential = 1430), the system contains 1.8 kg (4 lbs) of refrigerant, which has a CO2 equivalent of 2.574 metric tonnes (2.873 tons). If machine is equipped with R1234yf (Global Warming Potential = 0.501), the system contains 1.7 kg (3.75 lbs) of refrigerant, which has a CO2 equivalent of less than 0.001 metric tonnes (0.001 tons). |
| Note | With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in) |
| Fuel Tank | 195 l |
| Cooling System | 19 l |
كل المواصفات (122)
| Model | D3 |
|---|---|
| Product Page | https://www.cat.com/en_US/products/new/equipment/dozers/small-dozers/106100.html |
| Caterpillar Category | Small Dozers |
| Caterpillar Category Path | Products > Equipment > Dozers > Small Dozers > D3 |
| Caterpillar Product Family | equipment |
| Type | Parallelogram |
| Caterpillar Product Page ID | 106100 |
| Height | 165 mm |
| Operating Weight | 9362 kg |
| Diesel Exhaust Fluid (DEF) Tank | 19 l |
| Weights — Note (1) | Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. |
| Weights — Note (2) | For machine with ripper, add 554 kg (1,222 lb). |
| Ground Pressure | 38.9 kPa |
| Number of Rollers - Each Side | 7 |
| Maximum Digging Depth | 337.5 mm |
| Track Gauge | 1600 mm |
| Dimensions — Note | Abrasion Undercarriage |
| Speed | Variable |
| Throat Clearance | 171.5 mm |
| Pump Output* | 65 L/min |
| ROPS | ISO 3471:2008 |
| FOPS | ISO 3449:2005 Level II |
| Overall Width | 709 mm |
| Power - Net | 77.6 kW |
| Net Power - 2,200 rpm - SAE J1349 | 77.6 kW |
| Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 | 77.6 kW |
| Operating Weight - LGP | 9693 kg |
| Operating Weight - LGP, 762 mm/30 in | 9893 kg |
| Drive Pumps | 1 |
| Maximum Travel Speed - Reverse | 10 km/h |
| Relief Valve Settings | 48500 kPa |
| Maximum Travel Speed - Forward | 9 km/h |
| Track Motors | 2 |
| Hydraulic Controls — Relief Valve Settings | 20600 kPa |
| Number of Shanks | 3 |
| Weight | 554 kg |
| Maximum Ground Clearance Under Tip | 448 mm |
| Maximum Reach - Ground Line | 766 mm |
| Power Train | Hydrostatic |
| Length - Track on Ground - LGP | 2310 mm |
| Length - Track on Ground - LGP, 762 mm (30 in) | 2310 mm |
| Shoe Width - Standard | 510 mm |
| Track Gauge - LGP | 1750 mm |
| Ground Pressure - LGP | 31.2 kPa |
| Shoe Width - LGP, 762 mm (30 in) | 762 mm |
| Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage | 40 |
| Shoe Width - LGP | 660 mm |
| Track Gauge - LGP, 762 mm (30 in) | 1860 mm |
| Ground Pressure - LGP, 762 mm (30 in) | 27.2 kPa |
| Number of Shoes - Each Side - Abrasion Undercarriage | 36 |
| Length of Track on Ground | 2310 mm |
| Final Drive - Each - LGP | 10 l |
| Crankcase - With Filter | 10.5 l |
| Transmission - Hydraulic Tank | 90 l |
| Final Drives - Each Side | 10 l |
| BLADE: Blade Capacity (SAE) - LGP | 2.34 m³ |
| BLADE: Blade Width - LGP | 3220 mm |
| BLADE: Digging Depth - LGP | 590 mm |
| BLADE: Blade Cutting Edge Angle, Adjustable - LGP | 52° to 58° |
| BLADE: Blade Width at Maximum Angle - LGP | 2940 mm |
| BLADE: Blade Lift Height - LGP | 767 mm |
| BLADE: Maximum Tilt - LGP | 448 mm |
| Ground Clearance - LGP, 762 mm (30 in) | 332 mm |
| Ground Clearance - LGP | 332 mm |
| BLADE: Blade Height - LGP | 1010 mm |
| Overall Length - With Blade - LGP, 762 mm (30 in) | 4309 mm |
| Overall Length - With Blade - LGP | 4309 mm |
| BLADE: Maximum Angle (either side) - LGP | 25° |
| Length of Basic Dozer (without blade) - Standard | 3270 mm |
| Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) | 3270 mm |
| Length of Basic Dozer (without blade) - LGP | 3270 mm |
| Dozer Height - Standard | 2769 mm |
| Width of Dozer (standard shoes, no blade) - Standard | 2110 mm |
| Width of Dozer (standard shoes, no blade) - LGP | 2410 mm |
| Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) | 2630 mm |
| Dozer Height - LGP | 2769 mm |
| Dozer Height - LGP, 762 mm (30 in) | 2769 mm |
| BLADE: Maximum Angle (either side) - Standard | 25° |
| BLADE: Blade Capacity (SAE) - Standard | 2.19 m³ |
| BLADE: Blade Width at Maximum Angle - Standard | 2636 mm |
| Ground Clearance - Standard | 332 mm |
| Track Gauge - Standard | 1600 mm |
| BLADE: Digging Depth - Standard | 605 mm |
| Overall Length - With Blade - Standard | 4337 mm |
| BLADE: Blade Lift Height - Standard | 767 mm |
| BLADE: Blade Width - Standard | 2782 mm |
| BLADE: Blade Cutting Edge Angle, Adjustable - Standard | 52° to 58° |
| BLADE: Blade Height - Standard | 1073 mm |
| BLADE: Maximum Tilt - Standard | 402 mm |
| Maximum Line Pull - Bare Drum | 14583 kg |
| Maximum Line Speed - Full Drum | 24 m/min |
| Retrieval Winch — Weight | 794 kg |
| Control | Hydraulic |
| Maximum Line Speed - Bare Drum | 15 m/min |
| Maximum Line Pull - Full Drum | 9231 kg |
| Rope Diameter - Optional | 19 mm |
| Drum Capacity - Recommended Cable | 84 m |
| Drum Capacity - Optional Cable | 59 m |
| Rope Diameter - Recommended | 16 mm |
| Winch Drive | Hydrostatic |
| Drum Diameter | 254 mm |
| Winch Length | 705 mm |
| Drum Width | 274 mm |
| Maximum line pull – bare drum | 18144 kg |
| High Performance Winch — Weight | 610 kg |
| Rope diameter – optional | 19 mm |
| Drum capacity – recommended cable | 113 m |
| Maximum line speed – bare drum | 40 m/min |
| Maximum line speed – full drum | 63 m/min |
| High Performance Winch — Overall width | 741 mm |
| Drum capacity – optional | 78 m |
| Rope diameter – recommended | 16 mm |
| Maximum line pull – full drum | 11340 kg |
| Datasheet URL | https://s7d2.scene7.com/is/content/Caterpillar/CM20200806-eccff-7f5a8 |
