Caterpillar

AD30 Underground Mining Truck

Name: AD30 Underground Mining Truck
Brand: Caterpillar

لا يعرض أي بائع سعرًا لهذا المنتج بعد. أرسل طلبك وسنعود إليك بأفضل عرض.

اطلب عرض سعر

يكتمل الطلب في تطبيق Ohmva بعد تسجيل الدخول.

الوصف

AD30 Underground Mining Truck

المواصفات

Engine Model	Cat® C15
Bore	137.2 mm
Stroke	171.5 mm
Displacement	15.2 l
Note (1)	Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.
Note (2)	All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications in 40 CFR Part 1065 and EU specifications in Directive 97/68/EC with a density of 0.845-0.850 kg/L @ 15° C (7.05-7.09 lb/gal @ 59° F) and fuel inlet temperature 40° C (104° F).
Note (3)	Engine derate will commence at an altitude of 2743 m (8,999 ft).
Forward - 1	6.3 km/h

كل المواصفات (64)

Note (4)	Optional Ventilation Reduction package available. Optional engine with emissions equivalent to Tier 3 and EU Stage IIIA is also available.
Forward - 2	11.3 km/h
Note (5)	Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available.
Forward - 3	20.8 km/h
Forward - 4	36.7 km/h
Note	Heaped SAE 2:1.
Reverse - 1	7.1 km/h
Fuel Tank	410 l
Cooling System	74 l
Transmission	67 l
Model	AD30
Product Page	https://www.cat.com/en_US/products/new/equipment/underground-hard-rock/underground-mining-trucks/17796875.html
Caterpillar Category	Underground Mining Trucks
Caterpillar Category Path	Products > Equipment > Underground - Hard Rock > Underground Mining Trucks > AD30
Caterpillar Product Family	equipment
Caterpillar Product Page ID	17796875
Transmission — Note	Maximum travel speeds with standard 26.5 × R25 tires.
Hydraulic Tank	145 l
Differential Ratio	3.38:1
Total Reduction Ratio	16.13:1
Standards	ROPS/FOPS Certified Cab
Total Cycle Time	21.7 s
Final Drives — Note	Fully floating axles.
Nominal Payload Capacity	30000 kg
Gross Machine Mass	60000 kg
Raise	10.5 s
Engine Power - Tier 3 Engine - ISO 14396:2002	299 kW
Engine Power - VR Engine - ISO 14396:2002	299 kW
Outside Clearance Radius	8571 mm
Inner Clearance Radius	5030 mm
Articulation Angle	42.5 °
Tire Size	26.5 × R25
Engine Crankcase - With Filter	34 l
Front Differential and Final Drives	56 l
Rear Differential and Final Drives	56 l
Body Capacities	11.3-17.5 m³ (14.8-22.9 yd³)
Body 1	11.3 m³
Body 2 - Standard Body	14.4 m³
Body 3	17.5 m³
Empty	28870 kg
Wide Body	16.8 m³
Empty - Front Axle	67.50%
Ejector Body (1)	15.2 m³
Empty - Rear Axle	32.50%
Ejector Body (2)	16.8 m³
Loaded	60000 kg
Loaded - Front Axle	44.20%
Loaded - Rear Axle	55.80%
Weights — Empty - Front Axle	19479 kg
Weights — Empty - Rear Axle	9391 kg
Weights — Loaded - Front Axle	26513 kg
Weights — Loaded - Rear Axle	33487 kg
Final Drive Ratio	4.76:1
Lower	11.2 s
Frame Oscillation	10 Degrees
Datasheet URL	https://s7d2.scene7.com/is/content/Caterpillar/CM20241118-3b638-f6842