Caterpillar

R1700 Underground Mining Loader

رقم القطعة: CAT-730743084457382

لا يعرض أي بائع سعرًا لهذا المنتج بعد. أرسل طلبك وسنعود إليك بأفضل عرض.

يكتمل الطلب في تطبيق Ohmva بعد تسجيل الدخول.

الوصف

R1700 Underground Mining Loader

المواصفات

Engine ModelCat® C13
Note (1)Power ratings apply at a rated speed of 1,800 rpm for LRCs (VR and Tier 3/Stage IIIA) engines when tested under the reference conditions for the specified standard.
Note (2)Power ratings apply at a rated speed of 2,050 rpm for HRC (Stage V) engine when tested under the reference conditions for the specified standard.
Note (3)All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications in 40 CFR Part 1065 and EU specifications in Directive 97/68/EC with a density of 0.845-0.850 kg/L @ 15° C (59° F) and fuel inlet temperature 40° C (104° F).
Forward - 14.9 km/h
Note (4)No engine derating required up to 2895 m (9,500 ft) altitude for Stage V engines, 3505 m (11,500 ft) altitude for Tier 3/Stage IIIA engines, and 3200 m (10,500 ft) for Tier 2/Stage II VR engines.
Forward - 29.2 km/h
Note (5)Optional Ventilation Reduction package available.
كل المواصفات (66)
Forward - 316.4 km/h
Note (6)Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available.
Forward - 428.8 km/h
Note*Calculated weights.
Reverse - 15.9 km/h
Cooling System75 l
Reverse - 210.5 km/h
DEF Tank27 l
Engine Crankcase37 l
Transmission54 l
ModelR1700
Product Pagehttps://www.cat.com/en_US/products/new/equipment/underground-hard-rock/underground-mining-load-haul-dump-lhd-loaders/730743084457382.html
Caterpillar CategoryUnderground Mining Load Haul Dump (LHD) Loaders
Caterpillar Category PathProducts > Equipment > Underground - Hard Rock > Underground Mining Load Haul Dump (LHD) Loaders > R1700
Caterpillar Product Familyequipment
Caterpillar Product Page ID730743084457382
Axle Oscillation8°
Hydraulic Tank135 l
Total Cycle Time13.2 s
Nominal Payload Capacity15000 kg
Static Tipping Load - Straight Ahead - Lift Arms Horizontal37747 kg
Static Tipping Load - Full Turn - Lift Arms Horizontal31586 kg
Operating Mass*43177 kg
Operating Mass* - Front Axle17399 kg
Operating Mass* - Rear Axle25778 kg
Operating Mass + Rated Payload*58177 kg
Operating Mass + Rated Payload* - Front Axle41464 kg
Operating Mass + Rated Payload* - Rear Axle16713 kg
Reverse - 318.7 km/h
Reverse - 432.5 km/h
Raise6.8 s
Dump3.3 s
Lower, Empty, Float Down2.9 s
Dump Bucket - 26.1 m³
Dump Bucket - 47.2 m³
Ejector Bucket5.8 m³
Engine Power - Tier 3 Engine - ISO 14396:2002269 kW
Engine Power - Stage V Engine - ISO 14396:2002257 kW
Engine Power - VR Engine - ISO 14396:2002269 kW
Note (7)Optional engine meeting the U.S. EPA Tier 4 Final and EU Stage V emission standards is also available.
Outside Clearance Radius6909 mm
Gross Machine Mass - Loaded62739 kg
Inner Clearance Radius3139 mm
Breakout Force - Lift and Tilt24190 kg
Bucket Capacities5.7-8.6 m³ (7.5-11.2 yd³)
Articulation Angle44°
Dump Bucket - 1 - Standard Bucket5.7 m³
Tire Size26.5R25
Dump Bucket - 36.6 m³
Dump Bucket - 57.5 m³
Dump Bucket - 68 m³
Light Material Bucket8.6 m³
Bolt Together Bucket (1)6.8 m³
Bolt Together Bucket (2)7.5 m³
Fuel System486 l
Front Differential and Final Drive148 l
Rear Differential and Final Drive141 l
Datasheet URLhttps://s7d2.scene7.com/is/content/Caterpillar/CM20180810-32210-18870

منتجات مشابهة

معدات ثقيلة وآليات

السعر عند الطلب

اطلب عرض سعر