Caterpillar

R1600H Underground Mining Loader

Name: R1600H Underground Mining Loader
Brand: Caterpillar

لا يعرض أي بائع سعرًا لهذا المنتج بعد. أرسل طلبك وسنعود إليك بأفضل عرض.

اطلب عرض سعر

يكتمل الطلب في تطبيق Ohmva بعد تسجيل الدخول.

الوصف

R1600H Underground Mining Loader

المواصفات

Engine Model	Cat® C11
Bore	130 mm
Stroke	140 mm
Displacement	11.1 l
Note (1)	Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.
Note (2)	All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications in 40 CFR Part 1065 and EU specifications in Directive 97/68/EC with a density of 0.845-0.850 kg/L @ 15° C (59° F) and fuel inlet temperature 40° C (104° F).
Note (3)	No engine derating required up to 3048 m (10,000 ft) for Tier 3 Engine and 1828 m (6,000 ft) for VR Engine.
Forward - 1	4.5 km/h

كل المواصفات (65)

Note (4)	Optional Ventilation Reduction package available.
Forward - 2	9 km/h
Note (5)	Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU Stage IIIA is also available.
Forward - 3	16.8 km/h
Forward - 4	27.5 km/h
Note	*Calculated weights.
Reverse - 1	5 km/h
Fuel Tank	400 l
Cooling System	61 l
Reverse - 2	11 km/h
Transmission	47 l
Model	R1600H
Product Page	https://www.cat.com/en_US/products/new/equipment/underground-hard-rock/underground-mining-load-haul-dump-lhd-loaders/18509152.html
Caterpillar Category	Underground Mining Load Haul Dump (LHD) Loaders
Caterpillar Category Path	Products > Equipment > Underground - Hard Rock > Underground Mining Load Haul Dump (LHD) Loaders > R1600H
Caterpillar Product Family	equipment
Caterpillar Product Page ID	18509152
Axle Oscillation	10°
Hydraulic Tank	125 l
Standards	ROPS/FOPS Certified Cab
Total Cycle Time	11.2 s
Nominal Payload Capacity	10200 kg
Gross Machine Mass	44204 kg
Static Tipping Load - Straight Ahead - Lift Arms Horizontal	25905 kg
Static Tipping Load - Full Turn - Lift Arms Horizontal	21803 kg
Operating Mass*	30150 kg
Operating Mass* - Front Axle	12884 kg
Operating Mass* - Rear Axle	17266 kg
Operating Mass + Rated Payload*	40350 kg
Operating Mass + Rated Payload* - Front Axle	28128 kg
Operating Mass + Rated Payload* - Rear Axle	12222 kg
Reverse - 3	19 km/h
Reverse - 4	29.3 km/h
Raise	7.6 s
Dump	1.6 s
Lower, Empty, Float Down	2 s
Dump Bucket - 1	4.2 m³
Dump Bucket - 4	5.9 m³
Ejector Bucket	4.8 m³
Engine Power - Tier 3 Engine - ISO 14396:2002	202 kW
Engine Power - VR Engine - ISO 14396:2002	202 kW
Breakout Force - Tilt (ISO)	17928 kg
Outside Clearance Radius	6638 mm
Breakout Force - Lift (ISO)	19202 kg
Inner Clearance Radius	3291 mm
Bucket Capacities	4.2-5.9 m³ (5.5-7.7 yd³)
Articulation Angle	42.5°
Dump Bucket - 2 - Standard Bucket	4.8 m³
Tire Size	18 × R25
Dump Bucket - 3	5.6 m³
Engine Crankcase - With Filter	34 l
Bolt Together Bucket	5.3 m³
Front Differential and Final Drives	80 l
Rear Differential and Final Drives	80 l
Turning Dimensions — Note	*Clearance dimensions are for reference only.
Secondary Fuel Tank - If Equipped	330 l
Datasheet URL	https://s7d2.scene7.com/is/content/Caterpillar/CM20221115-2104e-c0536