BTM800 Beam Terminal Module c/w Cover

Name: BTM800 Beam Terminal Module c/w Cover
Brand: ZETTLER
SKU: 555.800.067

رقم القطعة: 555.800.067

لا يعرض أي بائع سعرًا لهذا المنتج بعد. أرسل طلبك وسنعود إليك بأفضل عرض.

اطلب عرض سعر

يكتمل الطلب في تطبيق Ohmva بعد تسجيل الدخول.

الوصف

The APM800 is an MZX addressable power supply monitoring module which is usually used with the PSM800/820/821 power supply module to make an addressable power supply. The APM800 is designed to fix to studs on the top of the PSM800/820/821 The APM800 monitors the PSM800/820/821 for mains failure, earth fault, battery charger fault and battery fault. It can reset the PSM800/820/821 resettable 24Vdc output and initiate a battery test which then reports battery voltage and current to the controller. The BDM800 is designed to interface the FIRERAY reflective beam detectors to the MZX Digital Addressable Loop. The BDM800 provides power from the loop, monitors the Fire and Fault outputs of the detector and also monitors inter-connections for open and short circuit faults. Supplied fitted in a standard double gang ancillary housing, the BDM800 greatly simplifies the wiring normally associated with beam detection. The considerable cost of providing local power supplies that satisfy the stringent requirements of BS5839 part 1 is eliminated. If it is necessary to site the BDM800 Beam Detector Module some distance from the beam detector itself, an optional BTM800 beam termination module is available to minimise and simplify the wiring. The BTM800 is housed in a standard double gang ancillary cover and has all the connections and components required to minimise installation time.

المواصفات

ZETTLER Order Code	555.800.067
ZETTLER Category	Interface & I/O Modules
ZETTLER Model	BTM800
ZETTLER Range	Addressable Ancillary Modules
Weight	794g
Housing	148 x 87 x 14 mm
EMC/RFI	Equal or exceeds EN50081-1 & EN50130-4
Relative humidity	Up to 95% RH non-condensing

كل المواصفات (17)

Operating Temp	-25°C to +70°C
Dimensions	24H x 127W x 57D mm
Supply voltage from the loop	20–40 V DC
Dimensions (W x H x D) with housing	148 x 87 x 14 mm
Non-condensing ambient humidity (max.)	95%
Dimensions (W x H x D) PCB	80 x 60 x 16 mm
Max. cable resistance on the input circuit	50 Ω
Ambient temperature Operation	-10°C to +55°C
555.800.067	BTM800 Beam Terminal Module c/w Cover