DIM800 Module c/w front cover
رقم القطعة: 555.800.042
لا يعرض أي بائع سعرًا لهذا المنتج بعد. أرسل طلبك وسنعود إليك بأفضل عرض.
يكتمل الطلب في تطبيق Ohmva بعد تسجيل الدخول.
الوصف
The DIM800 is designed to power and monitor a circuit of low voltage conventional detectors and callpoints. The detection circuit is powered from an external 24V d.c. supply and is reset by the MZX panel. The DIM800 monitors the external 24Vdc and provides a fault signal if it is lost. The input detection circuit can be wired as one or two spur circuits (Class B), one loop configured circuit (Class A) or one 4 wire detection circuit. The module is designed to be compatible with most conventional detection products. Compatibility has been tested to date on the following products: M300 Series, M601 Series, S100 Series, H Series, S231F, S231F+ & CP200. The HVR800 module is a non-addressable device which allows a low current mains rated relay to switch up to 10A. Alternatively a low voltage drive signal such as that provided by the RIM800 or 80 way mimic can be used to switch the integral mains relay via the opto-isolated input. The LIM800 Ancillary Line Isolator Module is designed to be used on all MZX addressable loops. It monitors the line condition and upon detection of a short circuit isolates the affected section whilst allowing the rest of the addressable loop to function normally. The LIM800 ensures that on a looped addressable system a short circuit fault cannot disable more detection devices than would be lost on a conventional non-addressable system in accordance with BS5839 Part 1.
المواصفات
| ZETTLER Order Code | 555.800.042 |
|---|---|
| ZETTLER Category | Interface & I/O Modules |
| ZETTLER Model | DIM800 |
| ZETTLER Range | Addressable Ancillary Modules |
| Weight | 100g |
| EMC/RFI | Equal or exceeds EN50081-1 & EN50130-4 |
| Relative humidity | Up to 95% RH non-condensing |
| Operating Temp | -25°C to +70°C |
كل المواصفات (25)
| Ambient temperature in operation | -25°C to +70°C |
|---|---|
| Dimensions | 14H x 148W x 87D mm |
| Supply voltage from the loop | 20–40 V DC |
| Current input In standby mode | 0.5 mA |
| Dimensions (W x H x D) with housing | 148 x 87 x 14 mm |
| in alarm mode (with red LED) | 4.5 mA |
| Line resistance | 200 Ω |
| Activation resistance | 100 Ω |
| Max. line resistance on the monitored line | 10 Ω |
| Non-condensing ambient humidity (max.) | 95% |
| S231F+ & CP200. — 555.800.012 | DIM800 Detector Input Module |
| S231F+ & CP200. — 555.800.042 | DIM800 Detector Input Module c/w Cover |
| S231F+ & CP200. — Dimensions (W x H x D) with housing | 148 x 87 x 14 mm |
| S231F+ & CP200. — Weight | 300 g |
| S231F+ & CP200. — Voltage supply from the loop | 20–40 V DC |
| S231F+ & CP200. — Current input In standby mode | 0.28 mA |
| S231F+ & CP200. — Current Input voltage for auxiliary voltage | 21.9–26.4 V DC 105 |
منتجات مشابهة
وحدات الواجهة والإدخال والإخراجZETTLER
CIM800 Contact input monitor
اطلب عرض سعر
ZETTLER
DIM800 Detector input monitor
اطلب عرض سعر
ZETTLER
CIM800 Module c/w Front Cover
اطلب عرض سعر
ZETTLER
BDM800 Beam Detector Module c/w Cover
اطلب عرض سعر
ZETTLER
MIM800 mini-input module
اطلب عرض سعر
ZETTLER
BTM800 Beam Terminal Module c/w Cover
اطلب عرض سعر
ZETTLER
SIO800 Single Input/Output Module
اطلب عرض سعر
ZETTLER
SIO800 Single Input/Output Module c/w Front Cover
اطلب عرض سعر