Caterpillar

826 Landfill Compactor

رقم القطعة: CAT-123860

لا يعرض أي بائع سعرًا لهذا المنتج بعد. أرسل طلبك وسنعود إليك بأفضل عرض.

اطلب عرض سعر

يكتمل الطلب في تطبيق Ohmva بعد تسجيل الدخول.

الوصف

826 Landfill Compactor

المواصفات

Engine ModelC15 Cat®
Gross Power - SAE J1995:2014324 kW
Net Power - SAE J1349:2011302 kW
Bore137.2 mm
Stroke171.4 mm
Displacement15.2 l
Note (1)* Sound suppression equipped
Note (2)The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
كل المواصفات (114)
Note (3)The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
NoteNet power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Fuel Tank782 l
Cooling System116 l
Engine Crankcase34 l
Transmission66 l
Model826
Product Pagehttps://www.cat.com/en_US/products/new/equipment/compactors/landfill-compactors/123860.html
Caterpillar CategoryLandfill Compactors
Caterpillar Category PathProducts > Equipment > Compactors > Landfill Compactors > 826
Caterpillar Product Familyequipment
Caterpillar Product Page ID123860
FrontPlanetary - Fixed
EmissionsU.S. EPA Tier 4 Final/ EU Stage V/Korea Stage V and Japan 2014 or Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
Rated Speed1800
Ground Clearance642 mm
Engine Power - ISO 14396:2002318 kW
Wheel Base3700 mm
Parking BrakeDrum and Shoe, Spring Applied, Hydraulic Released
Torque Rise33%
Maximum Depth of Cut461 mm
Maximum Lift Above Ground1277 mm
Service BrakesMulti Disc Wet (Enclosed) 2 WHL
Service Refill Capacities — NoteCat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester) * • 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). ** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Diesel exhaust fluid (DEF) that meets all requirements defined in ISO 22241-1:2006.
Transmission TypePlanetary - Powershift - ECPC
RearPlanetary - Oscillating
Differential - Final Drives - Rear110 l
Differential - Final Drives - Front100 l
Height - Top of Hood3312 mm
Direct Drive - Forward 16.8 km/h
Direct Drive - Forward 212.1 km/h
Direct Drive - Reverse 17.8 km/h
Direct Drive - Reverse 213.8 km/h
Steering System - CircuitPilot operated, load sensing
Steering System - PumpPiston - Variable Displacement
Oscillation Angle±5°
Operator Sound Pressure Level (ISO 6396:2008)72 dB(A)
Machine Sound Power Level (ISO 6395:2008)110 dB(A)
Net Power - ISO 9249:2007302 kW
High Idle Speed2300 r/min
Low Idle Speed800 r/min
Operating Weight (Tier 4 Final/Stage V)40917 kg
Pump Flow at 1,800 rpm117 L/min
Operating Weight (Tier 3/Stage IIIA equivalent)40454 kg
Main Relief Pressure26000 kPa
Maximum Supply Pressure24100 kPa
Ground Clearance - Bumper960 mm
Hydraulic System - Steering — Bore114.3 mm
Height - Top of Exhaust Pipe4439 mm
Hydraulic System - Steering — Stroke576 mm
Hydraulic Tank Only134 l
Vehicle Articulation Angle86 °
Drum Diameter1610 mm
Drum Width1200 mm
Maximum Altitude – Without Derating (Tier 4 Final/Stage V)2834 m
Maximum Operating Weight (Tier 4 Final/Stage V)41988 kg
Maximum Altitude - Without Derating (Tier 3/Stage IIIA)2773 m
Maximum Operating Weight (Tier 3/Stage IIIA equivalent)41526 kg
Lift SystemDouble Acting Cylinder
Hydraulic System — Bore120 mm
Hydraulic System — Stroke1070 mm
Diesel Exhaust Fluid Tank (Tier 4 Final/Stage V)32 l
Maximum System Flow170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm)
Steering Pressure Limited24000 kPa
Height to Top of Air Conditioning Condenser4568 mm
Height - Cab Roof4193 mm
Height - Top of Beacon4765 mm
Combination Tips (Weight Group)9582 kg
Centerline of Rear Axle to Edge of Counterweight - No Rear Radiator Guard2860 mm
Hitch to Centerline of Front Axle1850 mm
Plus Tips - Weight (Group)9980 kg
Centerline of Rear Axle to Edge of Counterweight - Including Rear Radiator Guard3096 mm
Paddle Tips - Weight (Group)9317 kg
Length - With Blade on Ground - Straight Blade - Including Rear Radiator Guard8715 mm
Outside Diameter1971 mm
Width over Drums149.6 in
Width - Over Wheels3800 mm
Turning Radius - Inside of Wheels2797 mm
Width – Moldboard Length4311 mm
ReplaceableWeld On
Width - Over End Bits4502 mm
Tip Height7 in
Height with Cutting Edge and Screen1900 mm
Capacity, Rated12.3 m³
Overall Machine Length (includes rear radiator guard, measured to cutting edge)8715 mm
Semi U-Blade — Width – Moldboard Length4462 mm
Semi U-Blade — Width - Over End Bits4522 mm
Semi U-Blade — Height with Cutting Edge and Screen2022 mm
Semi U-Blade — Maximum Depth of Cut619 mm
Semi U-Blade — Maximum Lift above Ground1165 mm
Semi U-Blade — Capacity, Rated16 m³
Diamond Tips Weight (Group)10885 kg
Outside Diameter - Diamond1983 mm
Feet Per Row6
Feet Per Wheel30
Tip Height - Diamond179 mm
Semi U-Blade — Overall Machine Length (includes rear radiator guard, measured to cutt~8e1faa9005 mm
U-Blade — Width – Moldboard Length4331 mm
U-Blade — Width - Over End Bits4398 mm
U-Blade — Height with Cutting Edge and Screen2019 mm
U-Blade — Maximum Depth of Cut619 mm
U-Blade — Maximum Lift above Ground1156 mm
U-Blade — Capacity, Rated17.5 m³
U-Blade — Overall Machine Length (includes rear radiator guard, measured to cutting edge)9357 mm
Datasheet URLhttps://s7d2.scene7.com/is/content/Caterpillar/CM20240220-f7ff8-d9bec

منتجات مشابهة

معدات ثقيلة وآليات

السعر عند الطلب

اطلب عرض سعر