Cat 908 Compact Wheel Loader
رقم القطعة: CAT-116320
لا يعرض أي بائع سعرًا لهذا المنتج بعد. أرسل طلبك وسنعود إليك بأفضل عرض.
يكتمل الطلب في تطبيق Ohmva بعد تسجيل الدخول.
الوصف
Cat 908 Compact Wheel Loader
المواصفات
| Engine Model | Cat C2.8* |
|---|---|
| Bore | 90 mm |
| Stroke | 110 mm |
| Displacement | 2.8 l |
| Note (1) | Net power advertised is the power available at the flywheel. |
| Note (2) | *Two Cat C2.8 engine emission options are available: 1) Meets U.S. EPA Tier 4 Final, EU Stage V. 2) U.S. EPA Tier 3 and EU Stage IIIA equivalent. Tier 3 engine specs are 0.3 kW/0.4 hp more gross power (SAE J1995), 0.2 kW/0.3 hp on net power (SAE J1349) and 1 N·m/0.7 lb-ft higher on gross torque (SAE J1995). |
| Note (3) | #Maximum gross and net torque measured at 1,600 rpm. |
| Note (4) | ^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center). |
كل المواصفات (199)
| Note (5) | †Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing. |
|---|---|
| Note (6) | ††Full compliance to EN474-3 and SAE J1197. |
| Note | Advertised power is tested per the specified standard in effect at the time of manufacture |
| Fuel Tank | 90 l |
| Cooling System | 12 l |
| Engine Crankcase | 8.8 l |
| Transmission | 2.4 l |
| Model | 908 |
| Product Page | https://www.cat.com/en_US/products/new/equipment/wheel-loaders/compact-wheel-loaders/116320.html |
| Caterpillar Category | Compact Wheel Loaders |
| Caterpillar Category Path | Products > Equipment > Wheel Loaders > Compact Wheel Loaders > 908 |
| Caterpillar Product Family | equipment |
| Caterpillar Product Page ID | 116320 |
| Front | Fixed (standard), Locking Differential (optional) |
| Operating Weight | 6632 kg |
| Dig Depth | 117 mm |
| Transmission — Note | #Factory default shown, can be adjusted to any speed up to 19 km/h (12 mph). |
| Transmission — Note (1) | *Creep function not available in this gear or above. |
| Transmission — Note (2) | **Max speed dependent on model and configuration (standard vs. high speed transmission). |
| Recyclability | 93% |
| Hydraulic Tank | 44.6 l |
| Hydraulic System - Including Tank | 70.5 l |
| Tires — Note (1) | Other tire choices are available. Contact your Cat dealer for details. |
| Tires — Note (2) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
| Cab — Note (1) | Canopy and cab, Rollover Protective Structures (ROPS) are available worldwide. Canopy not available in EU. |
| Tires — Note | *This tire has been used for all dimension, stability and performance data. |
| Rated Net Power - SAE J1349 | 54.2 kW |
| ROPS | ISO 3471:2008 |
| FOPS | ISO 3449:2005 Level II |
| Service Refill Capacities — Note | No Diesel Exhaust Fluid (DEF) fluid needed on this size engine. |
| Note (7) | #HPL-A weight, tipping and rated loads are within 1% of the HPL-V. |
| Bucket Capacities | 0.75-1.55 m³ (1.0-2 yd³) |
| Maximum Gross Power | 55.7 kW |
| Maximum Engine Speed | 2550 rpm |
| Maximum Gross Power - Rated Engine Speed | 2400 r/min |
| Bucket Capacities - General Purpose | 0.80-1.35 m³ (1.0-1.7 yd³) |
| Maximum Gross Power - SAE J1995 | 55.7 kW |
| Maximum Gross Power - ISO 14396 | 55.4 kW |
| Bucket Capacities - Light Material | 1.25-1.55 m³ (1.6-2 yd³) |
| Maximum Gross Power - ISO 14396 (metric) | 75.3 mhp |
| Rated Net Power - Rated Engine Speed | 2400 r/min |
| Rated Net Power - ISO 9249 | 53.8 kW |
| Hydraulic Cycle Time - Lift | 5.8 s |
| Rated Net Power - 2,400 rpm - ISO 9249 (metric) | 73.1 mhp |
| Hydraulic Cycle Time - Dump | 1.8 s |
| Maximum Gross Torque - SAE J1995 | 300 N·m |
| Maximum Gross Torque - ISO 14396 | 300 N·m |
| Maximum Net Torque - SAE J1349 | 296 N·m |
| Maximum Net Torque - ISO 9249 | 295 N·m |
| Multi-Purpose | 0.75-1.1 m³ (1.0-1.4 yd³) |
| Buckets — Note | Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration. |
| Departure Angle - Degrees | 30° |
| Buckets — Note (1) | Bucket capacities stated include BOCE, in line with ISO 7546. |
| Axles - Front Center Differential | 8.8 l |
| Axles - Rear Center Differential | 8.8 l |
| Rear | Fixed (standard), Locking Differential (optional) |
| Axles — Note | Oscillation of ±11 degrees via hitch between front and rear frames. |
| Steering Articulation Angle - Each Direction | 39 ° |
| Maximum Flow - Steering Pump | 46.7 L/min |
| Maximum Working Pressure - Steering Pump | 23000 kPa |
| Turning Radius - Over Bucket* | 4607 mm |
| Steering Cycle Times – (full left to full right) – at High Idle | 2.8 s |
| Turning Radius - Inside Tire** | 2033 mm |
| Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left | 3.25 turns or 4.00 turns |
| Forward and Reverse - Speed Range Creep# | 10 km/h |
| Forward and Reverse - Speed Range 1* | 10 km/h |
| Forward and Reverse - Speed Range 2** - High Speed | 17 km/h |
| Forward and Reverse - Speed Range 2** - Standard | 20 km/h |
| Forward and Reverse - Speed Range 3*** | 40 km/h |
| Transmission — Note (3) | ***Reverse is 30 km/h (19 mph). |
| Tire Size - Standard | *405/70 R20 SPT9 |
| Tire Size - Optional | 405/70 R20 Powerloads |
| Tire Size - Optional (1) | 400/70 R20 XMCL/Bibload |
| Tire Size - Optional (2) | 360/80 R20 TRI 2 |
| Tire Size - Optional (3) | 40X14-20 TL, SM/TR |
| Main Relief - 1st Auxiliary (3rd slice) | 23500 kPa |
| Main Relief - 1st Auxiliary (3rd slice) - Standard Flow* | 90 L/min |
| Main Relief - 1st Auxiliary (3rd slice) - High Flow* | 125 L/min |
| Main Relief - 2nd Auxiliary (4th slice) | 23500 kPa |
| Main Relief - 2nd Auxiliary (4th slice) - Flow | 45 L/min |
| Hydraulic Cycle Time - Rackback | 2.5 s |
| Hydraulic Cycle Time - Float Down | 3.6 s |
| Loader Hydraulic System — Note | * Maximum flow stated, actual flow delta could be 6% from data shown. Also adjustable from 20% to 100% of maximum flow through display. |
| Height: Ground to Cab** | 2670 mm |
| Height: Ground to Beacon** | 2849 mm |
| Height: Ground Axle Center** | 519 mm |
| Height: Ground Clearance** | 320 mm |
| Length: Overall* | 5544 mm |
| Length: Rear Axle to Bumper | 1391 mm |
| Length: Hitch to Front Axle | 1085 mm |
| Length: Wheel Base | 2170 mm |
| Clearance: Bucket at 45° * | 2623 mm |
| Clearance: Load over Height** | 2960 mm |
| Length: Front Axle to Front of Coupler | 1436 mm |
| Clearance: Level Bucket** | 3206 mm |
| Height: Bucket Pin** | 3412 mm |
| Height: Overall** | 4313 mm |
| Reach: Bucket at 45° * | 706 mm |
| Carry Height: Bucket Pin | 367 mm |
| Width: Bucket | 2080 mm |
| Width: Tread Center | 1570 mm |
| Turning Radius: Over Bucket | 4493 mm |
| Height - Ground to Cab** | 2670 mm |
| Width: Over Tires | 2021 mm |
| Turning Radius: Outside of Tires | 4005 mm |
| Turning Radius: Inside of Tires | 1981 mm |
| Height - Ground Clearance** | 320 mm |
| Rack Angle at Full Lift | 53° |
| Dump Angle at Full Lift | 45° |
| Rack Angle at Carry | 51° |
| Articulation Angle - Degrees | 39° |
| Operating Weight: Bucket ^ | 6637 kg |
| Length - Wheel Base | 2170 mm |
| Tipping Load - Straight - ISO 14397-1 † | 4820 kg |
| Clearance - Bucket at 45°* | 2511 mm |
| Tipping Load - Full Turn - ISO 14397-1 † | 4035 kg |
| Operating Weight: Carriage and Tines ^^ | 6467 kg |
| Clearance - Level Bucket** | 3197 mm |
| Tipping Load - Straight † | 3297 kg |
| Height - Bucket Pin** | 3412 mm |
| 80% of Tip: Firm and Level EN474-3 †† | 2638 kg |
| Dimensions - With HPL-V Coupler - Approximate# — Note (1) | *Vary with bucket |
| Reach - Bucket at 45°* | 811 mm |
| Dimensions - With HPL-V Coupler - Approximate# — Note (2) | **Vary with tire |
| Dimensions - With HPL-V Coupler - Approximate# — Note (3) | ^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket. |
| Width - Bucket | 2080 mm |
| Note (8) | Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class III fork carriage and tines, (tire supplier variability can impact dimensions by 2%). |
| Width - Tread Center | 1570 mm |
| Note (9) | Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9 |
| Width - Over Tires | 2021 mm |
| Length - Overall with Bucket | 5707 mm |
| Dimensions - With SSL Coupler - Approximate — Height: Overall** | 4403 mm |
| Dimensions - With SSL Coupler - Approximate — Carry Height: Bucket Pin | 388 mm |
| Dimensions - With SSL Coupler - Approximate — Rack Angle at Full Lift | 50° |
| Dimensions - With SSL Coupler - Approximate — Dump Angle at Full Lift | 48° |
| Dimensions - With SSL Coupler - Approximate — Rack Angle at Carry | 54° |
| Dimensions - With SSL Coupler - Approximate — Operating Weight: Bucket ^ | 6691 kg |
| Tipping Load – Straight – ISO 14397-1 † | 4347 kg |
| Tipping Load – Full Turn – ISO 14397-1 † | 3693 kg |
| Dimensions - With SSL Coupler - Approximate — Operating Weight: Carriage and Tines ^^ | 6530 kg |
| Dimensions - With SSL Coupler - Approximate — Tipping Load - Straight † | 4424 kg |
| Dimensions - With SSL Coupler - Approximate — 80% of Tip: Firm and Level EN474-3 †† | 2468 kg |
| Dimensions - With SSL Coupler - Approximate — Note (1) | *Vary with bucket |
| Dimensions - With SSL Coupler - Approximate — Note (2) | **Vary with tire |
| Dimensions - With SSL Coupler - Approximate — Note (3) | ^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket. |
| Tipping Load - Full Turn - ISO 14397-1† | 3085 kg |
| Dimensions - High Lift - With HPL-V Coupler - Approximate# — Length: Overall* | 6000 mm |
| Dimensions - High Lift - With HPL-V Coupler - Approximate# — Clearance: Bucket at 45° * | 3338 mm |
| Dimensions - High Lift - With HPL-V Coupler - Approximate# — Clearance: Load over Height** | 3282 mm |
| Dimensions - High Lift - With HPL-V Coupler - Approximate# — Clearance: Level Bucket** | 3693 mm |
| Dimensions - High Lift - With HPL-V Coupler - Approximate# — Height: Bucket Pin** | 3898 mm |
| Dimensions - High Lift - With HPL-V Coupler - Approximate# — Height: Overall** | 4769 mm |
| Dimensions - High Lift - With HPL-V Coupler - Approximate# — Reach: Bucket at 45° * | 990 mm |
| Dimensions - High Lift - With HPL-V Coupler - Approximate# — Width: Bucket | 2045 mm |
| Dimensions - High Lift - With HPL-V Coupler - Approximate# — Turning Radius: Over Bucket | 4825 mm |
| Dimensions - High Lift - With HPL-V Coupler - Approximate# — Rack Angle at Full Lift | 69° |
| Dimensions - High Lift - With HPL-V Coupler - Approximate# — Dump Angle at Full Lift | 40° |
| Dimensions - High Lift - With HPL-V Coupler - Approximate# — Rack Angle at Carry | 48° |
| Dimensions - High Lift - With HPL-V Coupler - Approximate# — Operating Weight: Bucket ^ | 6735 kg |
| Dimensions - High Lift - With HPL-V Coupler - Approximate# — Tipping Load - Straight~a0429a | 4167 kg |
| Dimensions - High Lift - With HPL-V Coupler - Approximate# — Tipping Load - Full Tur~2e186c | 3468 kg |
| Dimensions - High Lift - With HPL-V Coupler - Approximate# — Operating Weight: Carri~482e69 | 6596 kg |
| Dimensions - High Lift - With HPL-V Coupler - Approximate# — Tipping Load - Straight † | 4167 kg |
| Dimensions - High Lift - With HPL-V Coupler - Approximate# — 80% of Tip: Firm and Lev~c46640 | 2135 kg |
| Dimensions - High Lift - With HPL-V Coupler - Approximate# — Note (1) | *Vary with bucket |
| Dimensions - High Lift - With HPL-V Coupler - Approximate# — Note (2) | **Vary with tire |
| Dimensions - High Lift - With HPL-V Coupler - Approximate# — Note (3) | Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket. |
| Dimensions - High Lift - With SSL Coupler - Approximate — Length: Overall* | 6157 mm |
| Dimensions - High Lift - With SSL Coupler - Approximate — Clearance: Bucket at 45° * | 3181 mm |
| Dimensions - High Lift - With SSL Coupler - Approximate — Clearance: Load over Height** | 3282 mm |
| Dimensions - High Lift - With SSL Coupler - Approximate — Clearance: Level Bucket** | 3684 mm |
| Dimensions - High Lift - With SSL Coupler - Approximate — Height: Bucket Pin** | 3898 mm |
| Dimensions - High Lift - With SSL Coupler - Approximate — Height: Overall** | 4859 mm |
| Dimensions - High Lift - With SSL Coupler - Approximate — Reach: Bucket at 45° * | 1048 mm |
| Dimensions - High Lift - With SSL Coupler - Approximate — Carry Height: Bucket Pin | 388 mm |
| Dimensions - High Lift - With SSL Coupler - Approximate — Dig Depth** | 117 mm |
| Dimensions - High Lift - With SSL Coupler - Approximate — Width: Bucket | 2045 mm |
| Dimensions - High Lift - With SSL Coupler - Approximate — Turning Radius: Over Bucket | 4919 mm |
| Dimensions - High Lift - With SSL Coupler - Approximate — Rack Angle at Full Lift | 66° |
| Dimensions - High Lift - With SSL Coupler - Approximate — Dump Angle at Full Lift | 40° |
| Dimensions - High Lift - With SSL Coupler - Approximate — Rack Angle at Carry | 42° |
| Dimensions - High Lift - With SSL Coupler - Approximate — Operating Weight: Bucket ^ | 6836 kg |
| Dimensions - High Lift - With SSL Coupler - Approximate — Tipping Load - Straight -~0add20 | 3803 kg |
| Dimensions - High Lift - With SSL Coupler - Approximate — Tipping Load - Full Turn~e188b7 | 3149 kg |
| Dimensions - High Lift - With SSL Coupler - Approximate — Operating Weight: Carriag~1325b2 | 6674 kg |
| Dimensions - High Lift - With SSL Coupler - Approximate — Tipping Load - Straight † | 3803 kg |
| Dimensions - High Lift - With SSL Coupler - Approximate — 80% of Tip: Firm and Level~69e988 | 1984 kg |
| Dimensions - High Lift - With SSL Coupler - Approximate — Note (1) | *Vary with bucket |
| Dimensions - High Lift - With SSL Coupler - Approximate — Note (2) | **Vary with tire |
| Dimensions - High Lift - With SSL Coupler - Approximate — Note (3) | ^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket. |
| Datasheet URL | https://s7d2.scene7.com/is/content/Caterpillar/CM20220425-7e629-f0aab |
منتجات مشابهة
معدات ثقيلة وآلياتCaterpillar
950 GC Wheel Loader | Front Loader
اطلب عرض سعر
Caterpillar
986 Wheel Loader
اطلب عرض سعر
Caterpillar
966 GC Wheel Loader
اطلب عرض سعر
Caterpillar
995 Wheel Loader
اطلب عرض سعر
Caterpillar
920 Compact Wheel Loader
اطلب عرض سعر
Caterpillar
914 Small Wheel Loader
اطلب عرض سعر
Caterpillar
903 Compact Wheel Loader
اطلب عرض سعر
Caterpillar
D11 Dozer
اطلب عرض سعر