16 Motor Grader
لا يعرض أي بائع سعرًا لهذا المنتج بعد. أرسل طلبك وسنعود إليك بأفضل عرض.
يكتمل الطلب في تطبيق Ohmva بعد تسجيل الدخول.
الوصف
16 Motor Grader
المواصفات
| Engine Model | Cat® C13 ACERT™ VHP |
|---|---|
| Bore | 130 mm |
| Stroke | 157 mm |
| Displacement | 12.5 l |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. |
| Cooling System | 60.4 l |
| Transmission | Direct drive, power shift, countershaft |
| Brakes | ISO 3450 |
كل المواصفات (129)
| Steering | ISO 5010:2007 |
|---|---|
| Model | 16 |
| Product Page | https://www.cat.com/en_US/products/new/equipment/motor-graders/motor-graders/18346813.html |
| Caterpillar Category | Motor Graders |
| Caterpillar Category Path | Products > Equipment > Motor Graders > Motor Graders > 16 |
| Caterpillar Product Family | equipment |
| Caterpillar Product Page ID | 18346813 |
| Height | 787 mm |
| Forward - 4th | 12.3 km/h |
| Forward - 2nd | 6.1 km/h |
| Reverse - 1st | 3.6 km/h |
| Reverse - 3rd | 9.7 km/h |
| Reverse - 2nd | 6.6 km/h |
| Forward - 3rd | 8.9 km/h |
| Reverse - 4th | 15 km/h |
| Forward - 1st | 4.5 km/h |
| Pump Type | Variable piston |
| Forward - 6th | 25.7 km/h |
| Forward - 5th | 19 km/h |
| Engine Oil | 30 l |
| Width | 4.9 m |
| Number of Cylinders | 6 |
| Base Power (1st Gear) - Net | 217 kW |
| Speed at Rated Power | 2,000 rpm |
| Operating Weight - Typically Equipped | 30620 kg |
| Standard - Ambient Capability | 43 °C |
| Torque Rise | 46% |
| Blade Width | 4.9 m |
| Base Power (1st Gear) - Net - Metric | 217 kW |
| Arc Radius | 413 mm |
| Maximum Depth of Cut | 488 mm |
| Throat Clearance | 126 mm |
| Maximum Lift Above Ground | 395 mm |
| Standard - Fan Speed - Minimum | 550 rpm |
| Standard - Fan Speed - Maximum | 1,200 rpm |
| Gross Vehicle Weight - Base* - Total | 27607 kg |
| Gross Vehicle Weight - Base* - Front Axle | 7508 kg |
| Derating Altitude | 4572 m |
| Gross Vehicle Weight - Typically Equipped - Total | 30620 kg |
| High - Ambient Capability | 50 °C |
| Gross Vehicle Weight - Typically Equipped - Rear Axle | 22797 kg |
| Gross Vehicle Weight - Typically Equipped - Front Axle | 7823 kg |
| Optimized VHP Range - Net | 217-243 kW (291-326 hp) |
| Gross Vehicle Weight - Base* - Rear Axle | 20099 kg |
| Cutting Edge Width | 203 mm |
| Thickness | 25 mm |
| End Bit - Width | 152 mm |
| Blade Pull* - Base GVW | 17591 kg |
| Cutting Edge Thickness | 25 mm |
| Blade Pull* - Maximum GVW | 22024 kg |
| End Bit - Thickness | 19 mm |
| Fuel Capacity | 534 l |
| Hydraulic System - Tank | 65 l |
| Hydraulic System - Total | 114 l |
| Circle Centershift - Left | 647 mm |
| High Ambient - Fan Speed - Maximum | 1,450 rpm |
| Transmission - Differential - Final Drives | 114 l |
| Circle Centershift - Right | 597 mm |
| Tandem Housing - Each | 121.5 l |
| High Ambient - Fan Speed - Minimum | 550 rpm |
| Blade Tip Range - Backward | 5° |
| Gross Vehicle Weight - Maximum - Front Axle | 11500 kg |
| Front Wheel Spindle Bearing Housing | 0.9 l |
| Maximum Shoulder Reach Outside of Tires - Right | 2587 mm |
| Gross Vehicle Weight - Maximum - Rear Axle | 26050 kg |
| Circle Drive Housing | 8 l |
| Moldboard Sideshift - Right | 1094 mm |
| Forward/Reverse Gears | 8 Forward/6 Reverse |
| Moldboard Sideshift - Left | 740 mm |
| Brakes - Parking | Spring applied, hydraulically released |
| Maximum Shoulder Reach Outside of Tires - Left | 2282 mm |
| Brakes - Secondary | Oil-actuated, oil-disc |
| Brakes - Service | Oil-actuated, oil-disc |
| Gross Vehicle Weight - Maximum - Total | 37550 kg |
| Blade Tip Range - Forward | 40° |
| Circuit Type | Electro-hydraulic load sensing, closed center |
| Maximum Blade Position Angle | 65° |
| Front Axle - Wheel Lean - Left/Right | 18.2° |
| Maximum System Pressure | 24150 kPa |
| Front Frame Structure - Height | 356 mm |
| Top Speed - Forward | 51.7 km/h |
| Front Axle - Total Oscillation per Side | 32.0° |
| Standby Pressure | 3100 kPa |
| Front Frame Structure - Width | 324 mm |
| Top Speed - Reverse | 40.8 km/h |
| Pump Output* | 280 L/min |
| Maximum Torque | 1712 N·m |
| Front Axle - Height to Center | 688 mm |
| Turning Radius - Outside Front Tires | 8.9 m |
| Steering Range - Left/Right | 47.5° |
| Forward - 8th | 51.7 km/h |
| Forward - 7th | 35.5 km/h |
| Articulation Angle - Left/Right | 20° |
| Reverse - 6th | 40.8 km/h |
| Reverse - 5th | 28 km/h |
| Drawbar - Height | 203 mm |
| Brakes - Service - Surface Area | 49830 cm² |
| Drawbar - Width | 76 mm |
| Circle - Diameter | 1822 mm |
| Front Frame Structure - Thickness | 14 mm |
| Circle - Blade Beam Thickness | 50 mm |
| Sidewall Thickness - Outer | 22 mm |
| Tandem Oscillation - Front Up | 15° |
| Ripping Depth - Maximum | 452 mm |
| Sidewall Thickness - Inner | 22 mm |
| Ripper Shank Holders | 7 |
| Tandem Oscillation - Front Down | 25° |
| Penetration Force | 11830 kg |
| Machine Length Increase, Beam Raised | 1610 mm |
| Tandems — Height | 648 mm |
| Pry-Out Force | 17467 kg |
| Tandems — Width | 236 mm |
| Sound | ISO 6394/ISO 6395 |
| Drive Chain Pitch | 63.5 mm |
| Wheel Axle Spacing | 1841 mm |
| Shank Holder Spacing - Minimum | 445 mm |
| Shank Holder Spacing - Maximum | 500 mm |
| ROPS/FOPS | ISO 3471/ISO 3499 |
| Down Pressure - Base GVW | 13224 kg |
| Down Pressure - Maximum GVW | 19979 kg |
| Datasheet URL | https://s7d2.scene7.com/is/content/Caterpillar/CM20150619-33734-31756 |
منتجات مشابهة
معدات ثقيلة وآليات
Caterpillar
150 Motor Grader
اطلب عرض سعر
Caterpillar
18 Motor Grader
اطلب عرض سعر
Caterpillar
140/140 AWD Motor Grader
اطلب عرض سعر
Caterpillar
16 Motor Grader
اطلب عرض سعر
Caterpillar
160 Motor Grader
اطلب عرض سعر
Caterpillar
793 Mining Truck
اطلب عرض سعر
Caterpillar
140 Motor Grader
اطلب عرض سعر
Caterpillar
789 Next Generation
اطلب عرض سعر