Caterpillar

140 GC Motor Grader

Name: 140 GC Motor Grader
Brand: Caterpillar
SKU: CAT-124680

رقم القطعة: CAT-124680

لا يعرض أي بائع سعرًا لهذا المنتج بعد. أرسل طلبك وسنعود إليك بأفضل عرض.

اطلب عرض سعر

يكتمل الطلب في تطبيق Ohmva بعد تسجيل الدخول.

الوصف

140 GC Motor Grader

المواصفات

Engine Model	Cat 7.1
Bore	105 mm
Stroke	135 mm
Displacement	7.01 l
Note (1)	Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture.
Note (2)	Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Note (3)	Power as declared per ISO 14396
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas.

كل المواصفات (58)

Note	Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (17.5-25 Bias/**17.5R-25), and other equipment.
Fuel Tank	295 l
Cooling System	10.6 gal (US)
Hydraulic System	45 l
Engine Crankcase	21 l
Transmission	18 l
Model	140 GC
Product Page	https://www.cat.com/en_US/products/new/equipment/motor-graders/motor-graders/124680.html
Caterpillar Category	Motor Graders
Caterpillar Category Path	Products > Equipment > Motor Graders > Motor Graders > 140 GC
Caterpillar Product Family	equipment
Caterpillar Product Page ID	124680
Emissions	U.S. EPA Tier 4 Final/EU Stage V
Width	2428 mm
Dimensions — Note	*Typically equipped with push block and ripper.
Number of Cylinders	6
Maximum Height	3363 mm
Net Power - ISO 9249/SAE J1349	147 kW
Standard Capability	43 °C
Engine RPM	2,200
Torque Rise - ISO 9294	40%
Operating Weight - Typically Equipped	17565 kg
Blade Width	3.7 m
Blade Height	610 mm
Arc Radius	413 mm
Maximum Depth of Cut	715 mm
Throat Clearance	112 mm
Maximum Lift Above Ground	475 mm
End Bit	152 mm
Length of Machine*	10322 mm
Derating Altitude	3000 m
High - Ambient Capability	50 °C
Maximum Torque - ISO 9249	835 N·m
Cutting Edge Width	152 mm
Width All Wheel Drive (AWD)	2523 mm
Circle Center Shift Left	752 mm
Circle Center Shift Right	728 mm
Maximum Shoulder Reach Left	1886 mm
Maximum Shoulder Reach Right	1812 mm
Moldboard Side Shift Left	649 mm
Moldboard Side Shift Right	526 mm
Blade Tip Range Backward	5
Blade Tip Range Forward	40
Circle Drive with Slip Clutch	7.5 l
Circle Drive without Slip Clutch	2 l
Diesel Exhaust Fluid Tank (Tier 4 Only)	16 l
All-Wheel Drive Weight (AWD) (Stage V)*	18390 kg
All-wheel Drive Weight (AWD) (Tier 4 Final)**	19105 kg
Weight (Tier 4 Final)**	18365 kg
Datasheet URL	https://s7d2.scene7.com/is/content/Caterpillar/CM20240730-9d948-132a5