Caterpillar

6015 Hydraulic Shovel

Name: 6015 Hydraulic Shovel
Brand: Caterpillar
SKU: CAT-130421

رقم القطعة: CAT-130421

لا يعرض أي بائع سعرًا لهذا المنتج بعد. أرسل طلبك وسنعود إليك بأفضل عرض.

اطلب عرض سعر

يكتمل الطلب في تطبيق Ohmva بعد تسجيل الدخول.

الوصف

6015 Hydraulic Shovel

المواصفات

Engine Model	Cat® C27
Bore	137.2 mm
Stroke	152.4 mm
Displacement	27 l
Note	Specifications shown above apply to highly regulated, backhoe configuration. Lesser regulated and frontless configurations are also available.
Fuel Tank	1700 l
Cooling System	165 l
Model	6015

كل المواصفات (144)

Product Page	https://www.cat.com/en_US/products/new/equipment/hydraulic-mining-shovels/hydraulic-mining-shovels/130421.html
Caterpillar Category	Hydraulic Mining Shovels
Caterpillar Category Path	Products > Equipment > Hydraulic Mining Shovels > Hydraulic Mining Shovels > 6015
Caterpillar Product Family	equipment
Caterpillar Product Page ID	130421
Emissions	U.S. EPA Tier 4 Final and EU Stage V; China Nonroad Stage III, equivalent to U.S. EPA Tier 2; Equivalent to U.S. EPA Tier 1
Operating Weight	140 t
Hydraulic Tank	956 l
Engine Oil	87 l
Components (1)	Emergency stop switches: one in cab, three in engine module, one pull rope accessible from ground level
Components (2)	Four maintenance free batteries
Features (1)	Closed-loop with torque control
Components (3)	Lockable battery isolation switch
Components (4)	5 LED service lights
Features (2)	Hydraulic braking of swing motion when control is returned to neutral position or by counteracting control for stronger braking
Features (3)	All raceways and the internal gearing of swing ring supplied by automatic central lubrication system
Components (5)	14 LED high-brightness working lights
Components (6)	2 electric horns
Maximum Dump Height	8.5 m
Components (10)	FM/AM radio with MP3 auxiliary port
Components (9)	One (1) beacon light on cabin roof
Components (12)	Storage shelf suitable for lunch or toolbox
Feature	Accessible from ground level for diesel fuel and grease
Components (7)	Two (2) lights for rear end
Components (11)	Two stereo speakers
Components (8)	One (1) light for machine deck/service
Components (14)	Head and arm rests
Components (17)	Travel control pedals with removable hand levers
Components (19)	Laminated front upper window and tempered glass other windows
Ground Pressure	16.3 N/cm²
Components (13)	Color LCD display with service parameters, event and diagnostic annunciation, preventative maintenance, trip total, lifetime totals. Gauges for engine speed, engine oil pressue, and hydraulic oil temperature
Components (18)	Two power outlets, 10 amp (total)
Components (16)	Neutral lever (lock out) for all controls
Components (15)	Independently adjustable seat consoles with integrated joysticks
Maximum Digging Depth	8 m
Bucket Digging Force - ISO	538 kN
Stick Digging Force - ISO	466 kN
Hydraulic System - Including Tank	1752 l
Type (1)	Central bank lubrication system
Swing Drive	9 l
Type (2)	Grease is automatically applied to all attachment pivot points, slew bearing, and bucket linkage
Maximum Swing Speed	4.9 r/min
Maximum Drawbar Pull	800 kN
Engine Output - SAE J1995	615 kW
Bucket Payload	14.6 t
Gross Power - SAE J1995	615 kW
Equipped With (1)	One pull rope emergency stop
Net Power - SAE J1349	606 kW
Aspiration	Turbocharged and air-to-air aftercooled
Equipped With (2)	Quick couplings for: diesel fuel and grease
System Voltage	24 V
Number of Cylinders	12
Engine - Equivalent to U.S. EPA Tier 2 — Gross Power - SAE J1995	626 kW
Main Pumps	3 × variable swash plate pumps
Engine - Equivalent to U.S. EPA Tier 2 — Net Power - SAE J1349	618 kW
Filters (3)	Pressure filters (16 μm), servo circuit
Weights — Note	Operating weight includes: 700 mm (28 in) track pads, 7.6 m (24 ft 11 in) boom, 3.4 m (11 ft 2 in) stick, standard rock bucket, 100% fuel and lubricants
Batteries	4 × 200 Ah (12 V each)
Weights — Operating Weight	140,000 kg
Filters (2)	Full-flow filters (20 μm), return circuit
Standard	700 mm
Wide	900 mm
Filters (1)	Full-flow high-pressure filters (200 μm) for main pumps
Extra Wide	1000 mm
Filters (5)	Swing charge filter (15 μm)
Number of Shoes - Each Side	46
Number of Track Rollers - Each Side	9
Number of Carrier Rollers - Each Side	3
Track Pads	Heavy Duty (HD) with double grouser
Travel Speed - Two Stages - 1st Stage - Maximum	2.6 km/h
Grease Tank	215 l
Filters (4)	Full-flow filters (6 μm), cooling return circuit
Travel Speed - Two Stages - 2nd Stage - Maximum	3.7 km/h
Maximum Drawbar Pull - Forward	858 kN
Maximum Drawbar Pull - Reverse	983 kN
Gradeability - Travel Drives	Approximately 42%
Hydraulic Track Tensioning	With accumulator
Buckets Equipped With	– Special liner material covering main wear areas inside and outside – Lip shrouds – Wing shrouds – Heel shrouds
Alternator Rating	150 A (24 V) in total
Main Pumps - Maximum Total Oil Flow	1544 L/min
Type (3)	Standard grease reel on machine for bucket linkage
Main Pumps - Maximum Pressure - Attachment	320 bar
Swing System — Swing Drive	Two (2) compact planetary transmissions with axial piston motors
Type (4)	Grease refill service point accessible from ground
Parking Brake	Wet multiple disc brake, spring-loaded/hydraulically released
Swing Ring	Triple-race roller bearing with sealed internal greasing
Pilot Pump - Maximum Flow, Pilot	153 L/min
Pilot Pump	1 × gear pump
Pilot Pump - Maximum Pressure, Pilot	95 bar
Main Pumps - Maximum Pressure - Travel	320 bar
Engine Fan Pump - Maximum Flow, Engine Fan	201 L/min
Swing Pump	1 × variable swash plate pump
Maximum Tractive Force	877 kN
Engine Fan Pump - Maximum Pressure, Engine Fan	220 bar
Swing Pump - Maximum Flow - Swing	479 L/min
Operator's Cab — Components (6)	Joystick Controls Alternate Patterns including ISO/JIS, BHL, MHI, KOBE, or SCM
Engine Fan Pump	1 × variable swash plate pump
Swing Pump - Maximum Pressure - Swing	365 bar
Hydraulic Fan Pump - Maximum Pressure, Hydraulic Fan	135 bar
Hydraulic Fan Pump - Maximum Flow, Hydraulic Fan	86 L/min
Hydraulic Fan Pump	1 × variable swash plate pump
Operator's Cab — Components (1)	Pressurized cab with positive filtration
Hydraulic Oil Cooling - Maximum Flow	1075 L/min
Operator's Cab — Components (2)	Heated cab mirror
Undercarriage — Components (1)	Heavy Duty (HD) with double-grouser track pads
Hydraulic Oil Cooling - Diameter of Fan	1168 mm
Undercarriage — Components (5)	Fully hydraulic self-adjusting track tensioning system with accumulator
Undercarriage — Components (2)	Chain links connected by hardened pins and bushings
Filters (6)	Pump case return screens (125 μm)
Undercarriage — Components (3)	Postive Pin Retention (PPR2) sealed and greased track design
Undercarriage — Gradeability - Travel Drives	38°/78% (SAE J1309)
Maximum Digging Height	12.8 m
Operator's Cab — Components (3)	Sliding upper door window
Undercarriage — Components (4)	Hardened running surfaces of sprockets, idlers, rollers and track chain links
Operator's Cab — Components (4)	Glass-breaking safety hammer
Maximum Digging Reach	13.9 m
Undercarriage — Components (6)	Automatic hydraulic retarder valve
Operator's Cab — Components (5)	Removeable lower windshield within cab storage
Undercarriage — Components (7)	Acoustic travel alarm (forward and reverse)
Operator's Cab — Components (7)	Beverage holder
Operator's Cab — Components (8)	Literature holder
Operator's Cab — Components (9)	AM/FM radio
Capacity - Grease Barrel	68 l
Attachments — Type (1)	Boom and stick torsion-resistant with welded box design
Attachments — Type (2)	High-tensile steel with solid steel castings at pivot areas
Attachments — Type (3)	Boom and stick stress-relieved after welding
Attachments — Type (4)	Float valve for boom down function
Bucket Digging Force - SAE	501 kN
Stick Digging Force - SAE	439 kN
Capacity 1:1	8.1 m³
Total Width	2682 mm
Number of Teeth	5
Tooth System	Cat C70 or M75
Weight - Including Standard Wear Package	8401 kg
Maximum Material Density - Loose	1.8 t/m³
Datasheet URL	https://s7d2.scene7.com/is/content/Caterpillar/CM20251217-c886a-578a1