Caterpillar

Cat 740 Articulated Truck

Name: Cat 740 Articulated Truck
Brand: Caterpillar
SKU: CAT-130540

رقم القطعة: CAT-130540

لا يعرض أي بائع سعرًا لهذا المنتج بعد. أرسل طلبك وسنعود إليك بأفضل عرض.

اطلب عرض سعر

يكتمل الطلب في تطبيق Ohmva بعد تسجيل الدخول.

الوصف

Cat 740 Articulated Truck

المواصفات

Engine Model	Cat® C15
Gross Power (SAE J1995)	337 kW
Rated Payload	36.3 t
Net Power (SAE J1349)	327 kW
Engine Power (ISO 14396)	333 kW
Bore	137 mm
Stroke	171.5 mm
Displacement	15.2 l

كل المواصفات (87)

Peak Engine Torque Gross (SAE J1995)	2320 N·m
Peak Engine Torque Speed	1200 r/min
Peak Engine Torque Net (SAE J1349)	2264 N·m
Note (1)	Advertised power is tested at 1,700 rpm.
Note (2)	Advertised power is tested per the specified standard in effect at the time of manufacture.
Lock to Lock	4.75 seconds @ 60 rpm
Note (3)	The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, aftertreatment, and fan at minimum speed.
Forward - 1	6.4 km/h
Note (4)	Net power when the fan is at maximum speed is 327 kW (439 hp) per the SAE reference conditions.
Forward - 2	8.5 km/h
Note (5)	Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
Forward - 3	11.5 km/h
Note (6)	Diesel exhaust fluid (DEF) used in Cat selective catalytic reduction (SCR) systems must meet the requirements outlined in ISO 22241-1. Requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Turning Dimensions - Steer Angle - Left/Right	45°
Forward - 4	14.8 km/h
Heaped (SAE 2:1)	22.7 m³
No Engine De-rating Below	3050 m
Turning Dimensions - Aisle Width	5595 mm
Turning Dimensions - Clearance Radius	8395 mm
Forward - 5	19.7 km/h
Struck	17.7 m³
Turning Dimensions - SAE Turning Radius	7698 mm
Turning Dimensions - Inside Radius	3960 mm
Forward - 6	24 km/h
Tailgate Heaped SAE 2:1	24.5 m³
Note	Dimensions are for machines equipped with 29.5 R25 tires.
Forward - 7	33.1 km/h
Reverse - 1	6.8 km/h
Tailgate Struck	18.7 m³
Forward - 8	39.8 km/h
Fuel Tank	550 l
Sound Levels — Note (1)	The declared dynamic operator sound pressure level is 72 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the cooling fan’s maximum speed. The sound level may vary at different cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.
Forward - 9	57.5 km/h
Cooling System	90 l
Sound Levels — Note (2)	Hearing protection may be needed when operating with an open operator station and cab or when not properly maintained or with doors/windows open for extended periods or in noisy environments.
Reverse - 2	15.7 km/h
Front Axle - Empty	19595 kg
Brake Cooling Tank	67 l
Interior Cab	72 dB(A)
DEF Tank	25 l
Engine Crankcase	52 l
Center Axle - Empty	6715 kg
Rear Axle - Empty	6605 kg
Steering/Hoist Hydraulic System	140 l
Total - Empty	32915 kg
Transmission - OTG	75 l
Final Drive - Each	5 l
Brakes	ISO 3450 – 2011
Front Axle - Rated Load	3176 kg
Axles - Each	60 l
Cab - FOPS	ISO 3449 Level II – 2005
Center Axle - Rated Load	16562 kg
Cab - ROPS	ISO 3471 – 2008
Rear Axle - Rated Load	16562 kg
Steering	ISO 5010 – 2019
Total - Rated Load	36300 kg
Model	740
Front Axle - Loaded	22771 kg
Product Page	https://www.cat.com/en_US/products/new/equipment/articulated-trucks/three-axle-articulated-trucks/130540.html
Center Axle - Loaded	23277 kg
Caterpillar Category	Three Axle Articulated Trucks
Rear Axle - Loaded	23167 kg
Caterpillar Category Path	Products > Equipment > Articulated Trucks > Three Axle Articulated Trucks > 740
Total - Loaded	69215 kg
Caterpillar Product Family	equipment
Type	High strength Brinell HB450 wear resistant steel
Caterpillar Product Page ID	130540
Front Plate	7 mm
Base Plate	13 mm
Side Plates	11 mm
Raise Time	12 s
Lower Time	12 s
Hydraulic Excavator: 374 - Passes	3-4
Hydraulic Excavator: 352 - Passes	5-6
Wheel Loader: 972 - Passes	3
Wheel Loader: 966 - Passes	4-5
Wheel Loader: 962 - Passes	5
Optimal Loader/Truck Pass Matching — Note	An optimum system match gives you a major productivity advantage. The 740 is an excellent match for the Cat 374 and 352 Hydraulic Excavators; and Cat 972, 966, and 962 Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
Datasheet URL	https://s7d2.scene7.com/is/content/Caterpillar/CM20251222-bd63a-e99f4