Caterpillar

725 Articulated Truck

Name: 725 Articulated Truck
Brand: Caterpillar
SKU: CAT-129340

رقم القطعة: CAT-129340

لا يعرض أي بائع سعرًا لهذا المنتج بعد. أرسل طلبك وسنعود إليك بأفضل عرض.

اطلب عرض سعر

يكتمل الطلب في تطبيق Ohmva بعد تسجيل الدخول.

الوصف

725 Articulated Truck

المواصفات

Engine Model	Cat® C13B
Gross Power (SAE J1995)	263 kW
Rated Payload	24 t
Net Power (SAE J1349)	257 kW
Engine Power (ISO 14396)	259 kW
Bore	130 mm
Stroke	157 mm
Displacement	12.5 l

كل المواصفات (83)

Peak Engine Torque Gross (SAE J1995)	1941 N·m
Peak Engine Torque Speed	1200 r/min
Peak Engine Torque Net (SAE J1349)	1712 N·m
Note (1)	Advertised power is tested at 1,700 rpm.
Note (2)	Advertised power is tested per the specified standard in effect at the time of manufacture.
Lock to Lock	4.75 seconds @ 60 rpm
Note (3)	The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed.
Forward - 1	8 km/h
Note (4)	Net power when the fan is at maximum speed is 257 kW (345 hp) per the SAE reference conditions.
Forward - 2	15 km/h
Note (5)	Meets U.S. EPA Tier 4 Final/EU Stage V, Japan 2014, and Korea Stage V emission standards.
Forward - 3	22 km/h
Note (6)	Diesel exhaust fluid (DEF) used in Cat SCR systems must meet the requirements outlined in ISO 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Turning Dimensions - Steer Angle - Left/Right	45°
Forward - 4	34 km/h
Heaped (SAE 2:1)	15 m³
No Engine De-rating Below	3810 m
Turning Dimensions - Aisle Width	5332 mm
Turning Dimensions - Clearance Radius	8075 mm
Forward - 5	47 km/h
Struck	11.5 m³
Turning Dimensions - SAE Turning Radius	7470 mm
Turning Dimensions - Inside Radius	3879 mm
Forward - 6	55 km/h
Tailgate Heaped SAE 2:1	15.9 m³
Note	Dimensions are for machines equipped with 23.5R25 tires.
Reverse - 1	9 km/h
Tailgate Struck	12 m³
Fuel Tank	400 l
Sound Levels — Note (1)	The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.
Cooling System	83 l
Sound Levels — Note (2)	Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Front Axle - Empty	14260 kg
DEF Tank	34 l
Engine Crankcase	43 l
Center Axle - Empty	4540 kg
Transmission	47 l
Rear Axle - Empty	4310 kg
Steering/Hoist Hydraulic System	123 l
Output Transfer Gear Box	25 l
Total - Empty	23110 kg
Final Drive - Each	125 l
Brakes	ISO 3450 – 2011
Front Axle - Rated Load	2524 kg
Cab - FOPS	ISO 3449 - 2005 Level II
Center Axle - Rated Load	10738 kg
Cab - ROPS	ISO 3471 – 2008
Rear Axle - Rated Load	10738 kg
Steering	ISO 5010 – 2019
Total - Rated Load	24000 kg
Model	725
Front Axle - Loaded	16784 kg
Product Page	https://www.cat.com/en_US/products/new/equipment/articulated-trucks/three-axle-articulated-trucks/129340.html
Center Axle - Loaded	15278 kg
Caterpillar Category	Three Axle Articulated Trucks
Rear Axle - Loaded	15048 kg
Caterpillar Category Path	Products > Equipment > Articulated Trucks > Three Axle Articulated Trucks > 725
Total - Loaded	47110 kg
Caterpillar Product Family	equipment
Type	High strength Brinell HB450 wear resistant steel
Caterpillar Product Page ID	129340
Front Plate	7 mm
Base Plate	13 mm
Side Plates	11 mm
Scow	13 mm
Raise Time	12 s
Lower Time	8 s
Hydraulic Excavators: 350/352 - Passes	5-Apr
Hydraulic Excavators: 336 - Passes	6-May
Wheel Loaders: 972/972 XE - Passes	4-Mar
Wheel Loaders: 966/966 XE - Passes	4
Wheel Loader: 962 - Passes	5-Apr
Optimal Loader/Truck Pass Matching — Note	An optimum system match gives you a major productivity advantage. The 725 is an excellent match for the Cat 350/352 and 336 Hydraulic Excavators and Cat 972, 966, 962, and 950 Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
Wheel Loader: 950 - Passes	5
Datasheet URL	https://s7d2.scene7.com/is/content/Caterpillar/CM20250929-fcc98-192ac