FR 5000 Detector Head (50m)

ZETTLER

FR 5000 Detector Head (50m)

رقم القطعة: 516.015.021

لا يعرض أي بائع سعرًا لهذا المنتج بعد. أرسل طلبك وسنعود إليك بأفضل عرض.

اطلب عرض سعر

يكتمل الطلب في تطبيق Ohmva بعد تسجيل الدخول.

الوصف

The FIRERAY® 5000 motorised, auto aligning infrared optical beam smoke detector can support two detector heads per system, thus saving on installation time and costs. This innovative system has been designed from the ground up to include pioneering technology that fully addresses the needs of the installer and user, both now and in the future. With its indu­stry leading optics, the FIRERAY 5000 is ideally suited for the protection of large areas where the use of traditional detection technologies would prove to be too difficult and/or costly to install. The FIRERAY 5000 combines an infrared transmitter and receiver in the same discrete unit and operates by projecting a welldefined beam to a reflective prism, which returns the beam to the receiver for analysis. Smoke in the beam path causes a drop in power, which, if below a predetermined level, results in an alarm signal. Getting the system operational is simplified by a number of groundbreaking features that combine to make the FIRERAY 5000 the quickest and easiest detector of its type to install. Once the detector heads are connected, using the Easifit First Fix system, an integral LASER, which is aligned along the optical path of the beam, can be activated. This allows the reflective prism to be sighted quickly and with confidence. Once the LASER has been used to coarsely align the beam, the AutOptimise beam alignment system takes over and automatically steers the beam into the optimum position. The system can be fully customised, according to local conditions; both alarm thresholds (sensitivity) and time to Alarm/Fault can be set from the ground level System Controller. Each detector head is independently configurable from 8m through to 100m and has its own individual fire threshold and dedicated fire / fault relay outputs. The System Controller retains one set of Fire and Fault relays that is common to all detectors that are installed.

المواصفات

ZETTLER Order Code516.015.021
ZETTLER CategorySpecialist Detectors — Beam, Aspirating, Linear Heat & Duct
ZETTLER ModelFR
ZETTLER RangeBeam Detection
IP ratingIP54
Operating Temp-20 to +55°C
Humidity93% RH (non condensing) max
ZETTLER Supplied RangeFIRERAY/FFE
كل المواصفات (12)
Controller202w x 230h x 81d mm 0.9 Kg
Detector134w x 135h x 134d mm - 0.5 Kg
Operating Voltage14 to 36 Vdc
Low power mode8 mA @ 24Vdc

منتجات مشابهة

كواشف متخصصة — شعاعية وشفط وحرارية خطية وقنوات هواء

السعر عند الطلب

اطلب عرض سعر