J-Class E-Series Effluent Pump 10JE05P4-2W115

Franklin Electric

J-Class E-Series Effluent Pump 10JE05P4-2W115

Name: J-Class E-Series Effluent Pump 10JE05P4-2W115
Brand: Franklin Electric

لا يعرض أي بائع سعرًا لهذا المنتج بعد. أرسل طلبك وسنعود إليك بأفضل عرض.

اطلب عرض سعر

يكتمل الطلب في تطبيق Ohmva بعد تسجيل الدخول.

الوصف

Designed to pump treated effluent longer distances than normal effluent sump-style pumps, the E-Series is ideal for deep water and higher head pumping applications such as aeration, ornamental fountains, and water fountains. Built with a renowned Franklin Electric submersible motor, the E-Series provides maximum durability with years of reliable service. Features and benefits: - Ideal for effluent pumping applications. - Stainless steel or thermoplastic discharge and motor bracket are tough and non-corrosive. Both materials are highly resistant to damage by minerals, metals, and other substances typically found in water. - Heavy duty, 300 V, 10 ft SJOOW motor leads. - Designed to provide years of reliable service: - 10 and 20 gpm units are equipped with a highly-engineered shaft bearing with built in dry-run protection - High-flow 35 to 90 gpm units are built with a proven and durable ceramic sleeve bearing - Hex rubber bearing has extra large surface assuring shaft stability and multiple flow channels keeping particles away from bearing surfaces. - Proven hydraulic staging allows close tolerances and increased performance. - Carbon phenolic upthrust washer prevents excessive wear in severe applications. - Removable built in check valve on 10-20 gpm pumps. No built in check valves on high capacity pumps. - Powered by a Franklin Electric submersible motor. - Filtered effluent service - Aeration - Ornamental fountains/waterfalls

المواصفات

HP 60Hz	1/2 hp
Frequency	60 Hz
Phases	Single-Phase
Amps - Service Factor	12 A
Volts	115 VAC
Voltage Tolerance (%)	-10.0% / +10.0%
Wire	2-Wire
Motor	Submersible

كل المواصفات (40)

Continuous Duty	Yes
Efficiency Service Factor Load [%]	62.00 %
Lead Retainer Method	Lead Jam Nut
Flow	10 gpm
Shut Off 60 Hz	242 ft
Stages	6
Motor Ambient Temperature Rating Nominal	86 °F
Maximum Fluid Temperature	120 °F
Pump Body Material	AISI 304 Stainless Steel
Impeller Material	Acetal
Motor Bracket Material	Thermoplastic
Check Valve	Yes
Discharge Material	Thermoplastic
Intake Screen Material	Thermoplastic
Thrust Bearing	Kingsbury Type
Lead Insulation Material	XLPE
Discharge	Threaded - FNPT
Discharge Diameter	1.25 "
Diameter With Cable Guard	3.9 "
Motor Length	9.51 "
Product Weight	25 lb
Component Motor Part Number	2445046110 G
Component Pump Part Number	94731005
Warranty Standard Time	12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing
Applications	Groundwater pumping in clean water well systems 4" diameter and greater
Item #	94721005
Model	10JE05P4-2W115
Series	Thermoplastic Submersible Pump Model
Product family	J-Class E-Series Effluent Pump
Cable Guard Material	Thermoplastic
Pump Length	12.97 "
Product Length	22.48 "