John Deere

7R 290 Tractor

رقم القطعة: JOHNDEERE-8040RW

لا يعرض أي بائع سعرًا لهذا المنتج بعد. أرسل طلبك وسنعود إليك بأفضل عرض.

يكتمل الطلب في تطبيق Ohmva بعد تسجيل الدخول.

الوصف

7R 290 Tractor

المواصفات

Model7R 290
Base Code8040RW
Divisiontractors
Product Familyrow-crop-4wd-tractors
ENGINE / LubricationFull-pressure, full-flow filtration with bypass
Rated PTO power (hp SAE) at rated engine speed (2100 erpm)*†242 hp (180 kW)
Rated engine power PS (hp ISO) at rated engine speed (ECE-R120)*290 hp (213 kW)
Max engine power PS (hp ISO) at 1900 engine rpm (ECE-R120)*319 hp (235 kW)
كل المواصفات (62)
ENGINE / Rated speed2,100 rpm
ENGINE / Filter, engine airDual stage
TRANSMISSIONS / e23 PowerShift 40K, 26 mph (40 km/h)42 km/h @ 1600 rpm w/grp 48 tires, 42 km/h @ 1520 rpm w/grp 49 tires)
TRANSMISSIONS / e23 PowerShift 50K, 31 mph (50 km/h)50 km/h @ 1900 rpm w/grp 48 tires, 50 km/h @ 1800 rpm w/grp 49 tires)
TRANSMISSIONS / John Deere Infinitely Variable Transmission, 26 mph (42 km/h)42 km/h @1360 rpm w/grp 48 tires, 42 km/h @ 1290 rpm w/grp 49 tires)
TRANSMISSIONS / John Deere Infinitely Variable Transmission, 31 mph (50 km/h)50 km/h @ 1700 rpm w/grp 48 tires, 50 km/h @ 1620 rpm w/grp 49 tires)
420/90R30 rear tires, TLS / Max ballast level145 lb (65.8 kg)/SAE PTO HP - see OM for speci fic ballast instructions
ENGINE / FUEL SYSTEMElectronically controlled, high-pressure common rail with electric fuel transfer pump (self priming)
FRONT AXLES / 3-POINT HITCH - REARElectronically controlled, high-pressure common rail with electric fuel transfer pump (self priming)
540/540E/1000 rpm / PTO Speed @ Engine rpm(540/1000 PTO rpm @ 1950 engine rpm) (540E/1000E PTO rpm @ 1750 engine rpm)
INTEGRATED TECHNOLOGY / Modular Telematics Gateway (MTG)Available with JDLink™ hardware, activations, and ethernet harnesses (availability dependent upon destination)
ENGINE / Filter systemTwo stage with water separator and service indicator light
ENGINE / Filter, primary10 micron replaceable cartridge w/water indication sensor and drain
TRANSMISSIONS / Alternator/BatteryStandard: 210 amp / 12 volt, Available: 250 amp / 12 volt
FRONT AXLES / HYDRAULIC SYSTEMClosed-center, pressure/flow compensated
FRONT AXLES / Take out oil capacityStandard: 65 L, Available: 85 L (aux reservoir)
FRONT AXLES / Category 3/3N w/ Quick-CouplerStandard: 15,200 lb (6894 kg)
540/540E/1000 rpm / Lift capacity through full lift range (measured 24 in. (610 mm) in front of hook6740 Ib (3060 kg) lift capacity (ground engaging requires premium front hitch)
540/540E/1000 rpm / Lift capacity through full lift range (measured 0 in. (0 mm) in front of hook po7670 lb (3480 kg) lift capacity (ground engaging requires premium front hitch)
INTEGRATED TECHNOLOGY / Service Advisor™ RemoteAvailable with JDLink™ hardware and activations
ENGINE / Filter, oilReplaceable cartridge style oil filter
ENGINE / Filter, secondary2 micron spin-on element
TRANSMISSIONS / ELECTRICAL SYSTEMTwo batteries in parallel
TRANSMISSIONS / Total cold cranking amps1,900 (2-950 CCA grp 31 batteries)
REAR AXLE FINAL DRIVES / DescriptionInboard planetary three pinion
REAR AXLE FINAL DRIVES / REAR AXLESRack-and-pinion
REAR AXLE FINAL DRIVES / 120 x 2550 mm diameter (4.72 x 100.4 in)Available
FRONT AXLES / Selective control valvesStandard: 4, Available: 5
FRONT AXLES / Main pump, axial piston (displacement)Standard: 63 cc, Available: 85 cc
FRONT AXLES / Maximum pressure2,958 psi (20,400 + or- 300 kPa )
FRONT AXLES / Rated flow, 63cc pump43 US gpm (162 lpm)
FRONT AXLES / Rated flow, 85cc pump59 US gpm (223 lpm)
FRONT AXLES / Available flow at a single rear SCV35 US gpm (132 lpm)
FRONT AXLES / Available flow at a single front SCV33 US gpm (126 lpm)
FRONT AXLES / 1-3/4 in. (44.5 mm), 20-spline, 1,000-rpmStandard
FRONT AXLES / 1-3/4 in. (44.5 mm), 20-spline, 1,000-rpm; capable of 1-3/8 in. (34.9 mm)Available
540/1000 rpm / 1-3/4 in (44.5 mm), 20-spline, 1,000-rpm; capable of 1-3/8 in. (34.9 mm)Available
540/1000/1000E rpm / 1-3/4 in. (44.5 mm), 20-spline, 1,000-rpm; capable of 1-3/8 in. (34.9 mm)Available
540/540E/1000 rpm / 3-POINT HITCH - FRONTCategory 3N
INTEGRATED TECHNOLOGY / Integrated AutoTrac™Standard
INTEGRATED TECHNOLOGY / CommandCenter™ G5 Plus Display 8.4 in (213 mm) w/ 4200 processorAvailability dependent upon destination
INTEGRATED TECHNOLOGY / CommandCenter™ G5 Plus Display 10 in (254 mm) w/ 4600 processorAvailability dependent upon destination
INTEGRATED TECHNOLOGY / StarFire™ ReceiverStandard
Fuel tank, IVT135 gal (513 L)
DEF tank6.9 gal (26.2 L)
WHEELBASE / MFWD / TLS115.2 in (2925 mm)
WHEELBASE / MFWD / TLS axle clearance - 1300 axle, G43 420/85R34 tires19.5 in (495 mm)
WHEELBASE / Turning radius - 600/70R30 group 43 tires @ 74.1-in. (1882 mm) spacing, TLS22 ft (6.7 m)
WHEELBASE / Turning radius - 620/75R30 group 44 tires @ 82-in. (2083 mm) spacing, TLS See OM for add28.5 ft (8.7 m)
AVERAGE BASE WEIGHT / IVT, 85cc pump, 4 SCVs, PTO, CAT4 drawbar, 600/70R30 front tires, 710/70R42 re25,700 lb (11700 kg)
AVERAGE BASE WEIGHT / IVT, 85cc pump, 6 SCVs, PTO, CAT4 drawbar, 480/70R34 front tires, 480/80R50 re24,300 lb (11000 kg)
420/90R30 rear tires, TLS / Max payload capacitySee OM for details on tractor loading
CAB / Cab glass area70.61 sq ft (6.56 sq m)
CAB / Cab volume Specifications and design subject to change without notice Pre-production models sh114.42 cu ft (3.24 cu m)

منتجات مشابهة

زراعة

السعر عند الطلب

اطلب عرض سعر