PC365LC-11
رقم القطعة: KOMATSU-PC365LC-11
لا يعرض أي بائع سعرًا لهذا المنتج بعد. أرسل طلبك وسنعود إليك بأفضل عرض.
يكتمل الطلب في تطبيق Ohmva بعد تسجيل الدخول.
الوصف
PC365LC-11
المواصفات
| Horsepower (HP) | 269 HP @ 1,950 rpm |
|---|---|
| Horsepower (kW) | 201 kW @ 1 950 rpm |
| Gradeability | 70%, 35° |
| Operating weight (kg) | 37 180 - 38 780 |
| Operating weight (lbs) | 81,791 - 85,495 |
| Number of track rollers (each side) | 8 |
| Number of shoes (each side) | 48 |
| Number of carrier rollers (each side) | 2 |
كل المواصفات (112)
| Engine model | Komatsu SAA6D114E-6* |
|---|---|
| Aspiration | Turbocharged, aftercooled, cooled EGR |
| Number of cylinders | 6 |
| Piston displacement (L) | 8.85 |
| Piston displacement (in^3) | 540 |
| Governor | All-speed control, electronic. |
| SAEJ1995 - Gross (kW) | 202 |
| SAEJ1995 - Gross (HP) | 271 |
| ISO 9249 / SAE J1349 - Net (HP) | 269 |
| Fuel tank (US gal) | 159.8 |
| Fuel tank (L) | 605 |
| Coolant (US gal) | 11.1 |
| Coolant (L) | 42 |
| Final drive (US gal) | 2.4 |
| Final drive (L) | 9 |
| Hydraulic tank (L) | 188 |
| Hydraulic tank (US gal) | 49.7 |
| Bucket capacity (m^3) | 0.68 - 1.96 |
| Bucket capacity (yd^3) | 0.89 - 2.56 |
| Number of selectable working modes | 6 |
| Variable Type | Variable displacement piston type |
| Maximum flow (US gpm) | 141.3 |
| Maximum flow (L/min) | 535 |
| HydrauMind Type | HydrauMind (Hydraulic Mechanical Intelligence) system, closed-center system with load sensing valves and pressure compensated valves |
| Gear Type | Variable displacement piston type |
| Main pumps for | Boom, arm, bucket, swing, and travel circuits |
| Implement circuits (psi) | 5540 |
| Travel circuit (psi) | 5540 |
| Implement circuits (MPa) | 38.2 |
| Pilot circuit (psi) | 470 |
| Boom (Number of cylinders – bore x stroke x rod diameter)(mm) | 140 x 1 480 x 100 |
| Implement circuits (kgf/cm^2) | 390 |
| Boom (Number of cylinders – bore x stroke x rod diameter)(in) | 5.5 x 58.3 x 3.9 |
| Arm (Number of cylinders – bore x stroke x rod diameter)(mm) | 160 x 1 825 x 110 |
| Arm (Number of cylinders – bore x stroke x rod diameter)(in) | 6.3 x 71.9 x 4.3 |
| Pilot circuit (kgf/cm^2) | 33 |
| Pilot circuit (MPa) | 3.2 |
| Travel circuit (kgf/cm^2) | 390 |
| Travel circuit (MPa) | 38.2 |
| Travel | 2 x axial piston motors with parking brake |
| Swing | 1 x axial piston motor with swing holding brake |
| Drive method type | Fully hydrostatic |
| Maximum drawbar pull (kgf) | 290 kN / 29 570 kg |
| Maximum drawbar pull (lbs) | 65191 |
| Service brake type | Hydraulic lock |
| Parking brake | Mechanical disc brake |
| High (mph) | 3.4 |
| High (kph) | 5.5 |
| Low (kph) | 3.2 |
| Low (mph) | 2 |
| Swing reduction | Planetary gear |
| Holding brake/Swing lock | Mechanical disc brake |
| Swing speed (rpm) | 9.5 |
| Operating weight features (ft) | Operating weight including 21 ft. 3 in one-piece HD boom, 10 ft. 5 in arm, 33.5 in track shoes, SAE heaped 2.56 yd3 bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment. |
| Operating weight features (mm) | Operating weight including 6 500 mm one-piece HD boom, 3 185 mm arm, 850 mm track shoes, SAE heaped 1.96 m3 bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment. |
| Cooling Type | Water-cooled, 4-cycle, direct injection |
| Bore (mm) | 114 |
| Bore (in) | 4.49 |
| Stroke (in) | 5.69 |
| Stroke (mm) | 144.5 |
| Engine Rated (rpm) | 1950 |
| Fan drive method for radiator cooling | Mechanical with viscous fan clutch |
| ISO 9249 / SAE J1349 - Net (kW) | 201 |
| Engine (L) | 38.5 |
| Fan at maximum speed - Net (HP) | 251 |
| Engine (US gal) | 10.2 |
| Fan at maximum speed - Net (kW) | 197 |
| Center frame | X-frame |
| Track frame | Box-section |
| Track adjuster | Hydraulic |
| Seal of track | Sealed |
| Drive method | Electric drive |
| Service brake | Electric brake |
| Swing torque (kg-m) | 11 386 |
| Swing torque (ft-lbs) | 82313 |
| Ground pressure with triple-grouser shoes 28 in (psi) | 8.79 |
| Swing drive (L) | 15.6 |
| Swing drive (US gal) | 4.12 |
| Operating weight with triple-grouser shoes 28 in (lbs) | 83012 |
| Operating weight with triple-grouser shoes 700 mm (kg) | 37 654 |
| DEF tank (US gal) | 10.3 |
| DEF tank (L) | 39.2 |
| Exterior – ISO 6395 (dB(A)) | 101 |
| Supply for control circuit | Self-reducing valve |
| Operator – ISO 6396 (dB(A)) | 69 |
| Ground pressure with triple-grouser shoes 700 mm (kg/cm^2) | 0.62 |
| Ground pressure with triple-grouser shoes 800 mm (kg/cm^2) | 0.55 |
| Ground pressure with triple-grouser shoes 31.5 in (psi) | 7.77 |
| Operating weight with triple-grouser shoes 800 mm (kg) | 38 054 |
| Mid (mph) | 2.8 |
| Mid (kph) | 4.5 |
| Operating weight with triple-grouser shoes 31.5 in (lbs) | 83894 |
| Ground pressure with triple-grouser shoes 33.5 in (psi) | 7.35 |
| Ground pressure with triple-grouser shoes 850 mm (kg/cm^2) | 0.52 |
| Operating weight with triple-grouser shoes 33.5 in (lbs) | 84335 |
| Operating weight with triple-grouser shoes 850 mm (kg) | 38 254 |
| Bucket / 1 - for 10'5 and 13'2 Arms (in) | 5.5 x 50.6 x 3.9 |
| Bucket / 1 - for 3.2 m and 4.0 m Arms (mm) | 140 x 1 285 x 100 |
| Motor-generator (US gal) | 2.25 |
| Motor-generator (L) | 8.5 |
| Swing motor - generator (US gal) | 0.95 |
| Swing motor - generator (L) | 3.6 |
| Ultra capacitor cooling system (L) | 11.7 |
| Ultra capacitor cooling system (US gal) | 3 |
