Q00JCPU-E - Number of I/O points: 256, number of I/O device points: 2048, program capacity: 8K…

Mitsubishi Electric

Q00JCPU-E - Number of I/O points: 256, number of I/O device points: 2048, program capacity: 8K…

رقم القطعة: Q00JCPU-E_3891

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع افتح تطبيق Ohmva.

الوصف

Q00JCPU-E - Number of I/O points: 256, number of I/O device points: 2048, program capacity: 8K…

المواصفات

Basic information / Model nameQ00JCPU-E
Basic information / OverviewNumber of I/O points: 256, number of I/O device points: 2048, program capacity: 8K steps, basic operation processing speed (LD X0): 200 ns, program memory capacity: 58K bytes, external interface: RS-232, without memory card interface, base: 5 slots, power-supply: 100...240 V AC input/5 V DC 3A output (English manual included)
Basic information / Sales statusDiscontinued
Listed / Model nameQ00JCPU-E 2010/09 Discontinued
Weight0.66 kg
Basic information / Conformance standardUL cUL CE(EMC) CE(LVD) BV
Basic information / Discontinued date2010/09*Please check or inquire it in each overseas sales company site because the sale situation is different depending on each countries.
Shock resistanceCompliant with JIS B 3502 and IEC 61131-2 (147 m/s2, 3 times each in 3 directions X, Y, Z)
Operating atmosphereNo corrosive gases
Operating altitude0...2000 m
Installation locationInside a control panel
Overvoltage categoryII or less
Pollution degree2 or less
Inrush current40 A, within 8 ms
Withstand voltageBetween the input and LG batched terminal and the output and FG batched terminal, 2300 V AC per minute (altitude 0...2000 m)
Insulation resistanceInput and LG batched, output and FG batched, batch input-LG, batch output-FG: 10 MΩ or higher by 500 VDC insulation resistance tester
Operating ambient temperature0...55 ˚C
Storage ambient temperature-25...75 ˚C
Operating ambient humidity5...95 %RH, non-condensing
Storage ambient humidity5...95 %RH, non-condensing
I/O control modeRefresh mode (The direct access input/output is available by specifying the direct access input/output (DX, DY).)
Number of I/O points256 points (X/Y0...FF)
Control methodStored program cyclic operation
Listed / OutlineNumber of I/O points: 256, number of I/O device points: 2048, program capacity: 8K steps, basic operation processing speed (LD X0): 200 ns, program memory capacity: 58K bytes, external interface: RS-232, without memory card interface, base: 5 slots, power-supply: 100...240 V AC input/5 V DC 3A output (English manual included)
Allowable momentary power failure timeWithin 20 ms (100 V AC or more)
Clock functionYear, month, date, hour, minute, second, and day of week (automatic leap year detection) Accuracy: -3.20...+5.27 s (TYP. +1.98 s)/d at 0 ˚C Accuracy: -2.57...+5.27 s (TYP. +2.22 s)/d at 25 ˚C Accuracy: -11.68...+3.65 s (TYP. -2.64 s)/d at 55 ˚C
Constant scan1...2000 ms (setting is available in increments of 1 ms by parameter)
Programming language / Sequence control languageRelay symbol language, logic symbolic language, MELSAP3 (SFC), MELSAP-L, function block and structured text (ST)
Processing speed / Sequence instruction / LD X0200 ns
Processing speed / Sequence instruction / MOV D0 D1700 ns
Program capacity8K steps (32K bytes)
Memory capacity / Program memory (drive 0)58K bytes
Memory capacity / Standard ROM (drive 4)58K bytes
Maximum number of storable files / Program memory6
Maximum number of storable files / Standard ROM6
Maximum number of intelligent function module parameters / Initial setting512 parameters
Maximum number of intelligent function module parameters / Refresh256 parameters
Number of I/O device points2048 points (X/Y0...7FF)
No. of device points / Internal relay (M)8192 points (M0...8191) by default (changeable)
No. of device points / Latch relay (L)2048 points (L0...2047) by default (changeable)
No. of device points / Link relay (B)2048 points (B0...7FF) by default (changeable)
No. of device points / Timer (T)512 points (T0...511) by default (changeable) (Low-speed and high-speed timers available) Low-speed or high-speed is specified by an instruction. The measurement unit is set by parameter. (Low-speed timer: 1...1000 ms (in increments of 1 ms), default: 100 ms) (High-speed timer: 0.1...100.0 ms (in increments of 0.1 ms), default: 10.0 ms)
No. of device points / Retentive timer (ST)0 points by default (changeable) (Low-speed and high-speed retentive timers available) Low-speed or high-speed is specified by an instruction. The measurement unit is set by parameter. (Low-speed retentive timer: 1...1000 ms (in increments of 1 ms), default: 100 ms) (High-speed retentive timer: 0.1...100.0 ms (in increments of 0.1 ms), default: 10.0 ms)
No. of device points / Counter (C)Normal counter: 512 points (C0...511) by default (changeable) Interrupt counter: 128 points max. (0 points by default, setting by parameters)
No. of device points / Data register (D)11136 points (D0...11135) by default (changeable)
No. of device points / Link register (W)2048 points (W0...7FF) by default (changeable)
No. of device points / Annunciator (F)1024 points (F0...1023) by default (changeable)
No. of device points / Edge relay (V)1024 points (V0...1023) by default (changeable)
No. of device points / Link special relay (SB)1024 points (SB0...3FF) (The number of device points is fixed.)
No. of device points / Link special register (SW)1024 points (SW0...3FF) (The number of device points is fixed.)
No. of device points / Step relay (S)2048 points (S0...127/block) (The number of device points is fixed.)
No. of device points / Pointer (P)300 points (P0...299) (The number of device points is fixed.)
No. of device points / Interrupt pointer (I)128 points (I0...127) (The number of device points is fixed.) (The fixed scan interval for the system interrupt pointer I28 to 31 can be set by parameter.) 2...1000 ms (in increments of 1 ms) Default I28: 100 ms, I29: 40 ms, I30: 20 ms, I31: 10 ms
No. of device points / Special relay (SM)1024 points (SM0...1023) (The number of device points is fixed.)
No. of device points / Special register (SD)1024 points (SD0...1023) (The number of device points is fixed.)
No. of device points / Function input (FX)16 points (FX0...F) (The number of device points is fixed.)
No. of device points / Function output (FY)16 points (FY0...F) (The number of device points is fixed.)
No. of device points / Function register (FD)5 points (FD0...4) (The number of device points is fixed.)
Link direct deviceDevice that directly accesses the link device of a network module Specification format: J□□\X□□, J□□\Y□□, J□□\SB□□, J□□\W□□, J□□\SW□□
Intelligent function module deviceDevice that directly accesses the buffer memory of an intelligent function module Specified form: U...\G...
Latch (data retention during power failure) range2048 points (L0...2047) by default (The latch range can be set for the devices, B, F, V, T, ST, C, D, and W.)
Internal current consumption (5 V DC)0.26 A
External dimensions / Height98 mm
External dimensions / Width245 mm
External dimensions / Depth98 mm
Vibration resistance / Compliant with .. d IEC 61131-2 / Under intermittent vibration ~62dc24Frequency: 5...8.4 Hz, Half amplitude: 3.5 mm Frequency: 8.4...150 Hz, Constant acceleration: 9.8 m/s2 Sweep count: 10 times each in X, Y, Z directions
Vibration resistance / Compliant with .. and IEC 61131-2 / Under continuous vibration ~d68864Frequency: 5...8.4 Hz, Half amplitude: 1.75 mm Frequency: 8.4...150 Hz, Constant acceleration: 4.9 m/s2
Equipment classClass I
Listed / Large categoriesProgrammable controller CPU
Listed / Medium categoriesBasic model
External interfaceTerminal block (M3.5 screw)
RUN/PAUSE contactOne contact can be set up in X0 to X7FF for each of RUN and PAUSE.
Input power supply voltage100...240 V AC (-15 %...+10 %)
Input frequency50/60 Hz ±5 %
Input voltage distortionWithin 5 %
Maximum input apparent power105 VA
Rated output current / 5 V DC3 A
Overcurrent protection / 5 V DC3.3 A or more
Overvoltage protection / 5 V DC5.5...6.5 V
Efficiency65 % or more
Operation indicationLED indication (The POWER LED of the CPU part: Normal: On (green), Error: Off)
FuseBuilt-in (user-unchangeable)
Contact output sectionNone
Number of mountable I/O modules5
Applicable moduleMELSEC-Q series modules
No. of device points / Index register (Z)10 points (Z0...9) (The number of device points is fixed.)

منتجات مشابهة

الأتمتة الصناعية و التحكم