NZ2GNSS2-8D - DC input: 8 points (single wiring), 4 points (double wiring), 24 V DC, 7.3 mA,…

Mitsubishi Electric

NZ2GNSS2-8D - DC input: 8 points (single wiring), 4 points (double wiring), 24 V DC, 7.3 mA,…

رقم القطعة: NZ2GNSS2-8D_3486

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع افتح تطبيق Ohmva.

الوصف

NZ2GNSS2-8D - DC input: 8 points (single wiring), 4 points (double wiring), 24 V DC, 7.3 mA,…

المواصفات

Basic information / Model nameNZ2GNSS2-8D
Basic information / OverviewDC input: 8 points (single wiring), 4 points (double wiring), 24 V DC, 7.3 mA, response time: 1...70 ms, 8 points/common, negative common type, spring-clamp terminal block
Basic information / Sales statusOn sale
Listed / SeriesRemote I/O
Listed / Model nameNZ2GNSS2-8D
Weight0.25 kg
Basic information / Conformance standardUL cUL CE(EMC) CE(Machinery) CE(RoHS) IEC 61508 IEC 62061 EN ISO 13849-1 KC(EMC) LR NK DNV ABS
Shock resistanceCompliant with JIS B 3502 and IEC 61131-2 (147 m/s2, duration of action 11 ms, 3 times in X, Y, Z directions respectively by sine half-wave pulse)
Operating atmosphereNo corrosive gases, flammable gases, less conductive dust
Operating altitude0...2000 m
Installation locationInside a control panel
Overvoltage categoryII or less
Pollution degree2 or less
Insulation resistanceBetween all DC external terminals and ground: 10 MΩ or higher by 500 V DC insulation resistance tester
Operating ambient temperature0...55 ˚C
Storage ambient temperature-40...75 ˚C
Operating ambient humidity5...95 %RH, non-condensing
Storage ambient humidity5...95 %RH, non-condensing
Network topologyLine topology, star topology (Coexistence of line topology and star topology is possible.), and ring topology
Listed / OutlineDC input: 8 points (single wiring), 4 points (double wiring), 24 V DC, 7.3 mA, response time: 1...70 ms, 8 points/common, negative common type, spring-clamp terminal block
Input typeDC input (negative common type)
Dielectric withstand voltageBetween all DC external terminals and ground: 510 V AC for 1 minute
External dimensions / Height50 mm
External dimensions / Width142 mm
External dimensions / Depth68 mm
Vibration resistance / Compliant with .. d IEC 61131-2 / Under intermittent vibration ~62dc24Frequency: 5...8.4 Hz, Half amplitude: 3.5 mm Frequency: 8.4...150 Hz, Constant acceleration: 9.8 m/s2 Sweep count: 10 times each in X, Y, Z directions
Vibration resistance / Compliant with .. and IEC 61131-2 / Under continuous vibration ~d68864Frequency: 5...8.4 Hz, Half amplitude: 1.75 mm Frequency: 8.4...150 Hz, Constant acceleration: 4.9 m/s2
Equipment classClass III
Listed / Large categoriesSafety I/O
Listed / Medium categoriesInput
External interfaceCommunication part: RJ45 connector Module power supply part: Terminal block for module power supply and FG (two-piece spring clamp terminal block) I/O part, external power supply part: 40-point two-piece spring clamp terminal block (push-in)
CC-Link IE TSN ClassCC-Link IE TSN Class B CC-Link IE TSN Class A
Multicast filterAvailable
Number of input points8 points (single wiring) 4 points (double wiring)
Rated input voltage24 V DC (ripple ratio: within 5 %) (allowable voltage range: 20.4...28.8 V DC)
Rated input current7.3 mA TYP. (24 V DC)
Maximum number of simultaneous input points100 %
Station typeRemote station
ON voltage/ON current12 V DC or more/3 mA or more
OFF voltage/OFF current5 V DC or less/1.3 mA or less
Input resistance2.6 kΩ
Input common terminal arrangement8 points/common (spring clamp terminal block type)
Protection degreeIP2X
CC-Link IE TSN protocol version / CC-Link IE TSN Class BProtocol version 2.0/1.0
CC-Link IE TSN protocol version / CC-Link IE TSN Class AProtocol version 2.0
Maximum response time for time-managed polling / CC-Link IE TSN Class A512 µs
Cyclic transmission / RX/RY points16 points
Cyclic transmission / RWr/RWw points4 points
Module power supply / Voltage24 V DC (ripple ratio: within 5 %) (allowable voltage range: 20.4...28.8 V DC)
Module power supply / Current160 mA
Listed / Small categoriesDC input
Input circuit response time / OFF to ON0.4 ms or less (24 V DC)
Input circuit response time / ON to OFF0.4 ms or less (24 V DC)
Safety remote station refresh response processing time2.0 ms
Input response time of safety remote stationInput circuit response time + Input response time (1.0 ms, 1.5 ms, 5 ms, 10 ms, 20 ms, 50 ms, 70 ms)
External power supply for input part / Voltage24 V DC (ripple ratio: within 5 %) (allowable voltage range: 20.4...28.8 V DC)
Cyclic transmission / SA\X/SA\Y points32 points
External power supply for input part / Current100 mA
Module power supply / Protection functionModule power supply overvoltage protection function, module power supply overcurrent protection function
External power supply for input part / Protection functionExternal power supply overvoltage protection function
Module power supply / Fuse1.6 A (not replaceable)
Power supply current for input device (COM+)0.4 A/terminal

منتجات مشابهة

الشبكات الصناعية والأمن السيبراني