Caterpillar

Cat® 352 UHD Ultra High Demolition Hydraulic Excavator

رقم القطعة: CAT-126940

لا يعرض أي بائع سعرًا لهذا المنتج بعد. أرسل طلبك وسنعود إليك بأفضل عرض.

اطلب عرض سعر

يكتمل الطلب في تطبيق Ohmva بعد تسجيل الدخول.

الوصف

Cat® 352 UHD Ultra High Demolition Hydraulic Excavator

المواصفات

Engine ModelCat C13B
Bore130 mm
Stroke157 mm
Displacement12.5 l
Note (1)Straight - R3.35 m (11'0") Stick (Over-the-Front)
Note (2)¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)*** 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. *While Caterpillar engines are compatible with these alternative fuels, some regions may not allow their use. ** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. *** Engines with no aftertreatment devices are compatible with higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).
Note (3)Hydraulic Variable Gauge undercarriage, Retrofit boom, R3.35TB (10'6") stick, HD 2.41 m³ ( 3.15 yd³) bucket, 600 mm (24") triple grouser shoes and 12 mt (26,455 lb) counterweight.
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. – If equipped with R134a (Global Warming Potential = 1430), the system contains 1 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). – If equipped with R1234yf (Global Warming Potential = 0.501), the system contains 0.85 kg (1.87 lb) of refrigerant which has a CO2 equivalent of 0.001 metric tonnes (0.001 tons).
كل المواصفات (85)
Cooling System52 l
DEF Tank80 l
Final Drive - Each9.5 l
Model352 UHD
Product Pagehttps://www.cat.com/en_US/products/new/equipment/excavators/demolition-excavators/126940.html
Caterpillar CategoryDemolition Excavators
Caterpillar Category PathProducts > Equipment > Excavators > Demolition Excavators > 352 UHD
Caterpillar Product Familyequipment
Caterpillar Product Page ID126940
Transport Width3255 mm
Fuel Tank Capacity715 l
EmissionsMeets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Operating Weight64500 kg
Hydraulic Tank217 l
Engine Oil40 l
Maximum Reach - Ground Level12790 mm
Ground Clearance510 mm
Track Width - Retracted3000 mm
Tail Swing Radius3760 mm
Net Power - ISO 9249330 kW
Net Power - ISO 9249 (DIN)448.7 hp (metric)
Engine Power - ISO 14396332 kW
Engine Power - ISO 14396 (DIN)451.4 hp (metric)
Biodiesel CapabilityUp to B20¹
Maximum Digging Depth5180 mm
BucketGD 3.08 m³ (4.03 yd³)
Maximum Cutting Height10690 mm
Maximum Loading Height10250 mm
Minimum Loading Height4580 mm
Bucket Digging Force - ISO268 kN
Stick Digging Force - ISO199 kN
Main System - Maximum Flow779 l/min (206 gal/min)
Maximum Pressure - Equipment35000 kPa
Maximum Pressure - Travel35000 kPa
Maximum Pressure - Swing26000 kPa
Swing Speed4.4 r/min
Maximum Swing Torque189 kN·m
Hydraulic System - Including Tank550 l
Shipping Height - Top of Cab3390 mm
Shipping Length18830 mm
Counterweight Clearance1435 mm
Track Length5770 mm
Maximum Pressure - Equipment - Lift Mode38000 kPa
Swing Drive - Each10.5 l
Track Length to Center of Rollers4770 mm
Machine Weight - Retrofit Configuration63000 kg
UHD in Cradle11800 kg
Maximum Pin Height at Stick Nose27.7 m
Retrofit Boom in Cradle - R3.9 TB Stick7630 kg
Maximum Weight at Stick Nose3700 kg
Retrofit Boom in Cradle - R3.35 TB Stick7460 kg
Working Ranges and Forces — Note (1)28 m (91' 10") UHD Front Over-the-Front
Retrofit Boom in Cradle - R2.9 TB Stick7150 kg
Maximum Working Pin Height at Stick Nose - 1/222930 mm
Engine — Note (1)Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Maximum Working Reach at Stick Nose - 1/213850 mm
Cab Height - With OPG3590 mm
Maximum Height at Stick Nose in Max Reach Position16110 mm
Dimensions — Note (1)28 m (91'10") UHD Front
Maximum Reach at Stick Nose15770 mm
Swing Mechanism — Swing Speed8.3 r/min
Working Gauge - Extended Position3400 mm
Shipping Gauge - Retracted Position2400 mm
Machine Length - without Front, with Counterweight7770 mm
Machine Length - without Front and Counterweight7600 mm
Track Width - Extended4000 mm
Dimensions — Note (2)600 mm (24") Track Shoes
Working Ranges and Forces - Retrofit Boom - Straight — Maximum Pin Height at Stick Nose12.13 m
Working Ranges and Forces - Retrofit Boom - Straight — Maximum Weight at Stick Nose5820 kg
Working Ranges and Forces - Retrofit Boom - Straight — Maximum Height at Stick Nose~b8a5812340 mm
Working Ranges and Forces - Retrofit Boom - Straight — Maximum Reach at Stick Nose11130 mm
Working Ranges and Forces - Retrofit Boom - Bent — Note 1Bent - R3.35TB m (11'0") Stick
Working Ranges and Forces - Retrofit Boom - Bent — Maximum Digging Depth6670 mm
Working Ranges and Forces - Retrofit Boom - Bent — Maximum Reach - Ground Level11880 mm
Working Ranges and Forces - Retrofit Boom - Bent — Maximum Loading Height7500 mm
Working Ranges and Forces - Retrofit Boom - Bent — Minimum Loading Height3050 mm
Datasheet URLhttps://s7d2.scene7.com/is/content/Caterpillar/CM20250106-70533-25a42

منتجات مشابهة

معدات ثقيلة وآليات

السعر عند الطلب

اطلب عرض سعر