D10 Dozer
رقم القطعة: CAT-115080
لا يعرض أي بائع سعرًا لهذا المنتج بعد. أرسل طلبك وسنعود إليك بأفضل عرض.
يكتمل الطلب في تطبيق Ohmva بعد تسجيل الدخول.
الوصف
D10 Dozer
المواصفات
| Engine Model | Cat® C27 |
|---|---|
| Bore | 137 mm |
| Stroke | 152 mm |
| Displacement | 27 l |
| Note (1) | *Excludes all fan losses. |
| Note (2) | All Engine ratings apply at 1,800 rpm. |
| Note (3) | Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft). |
| Note (4) | Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft). |
كل المواصفات (146)
| Note (5) | **Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature. |
|---|---|
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes. |
| Note | The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained. |
| Model | D10 |
| Product Page | https://www.cat.com/en_US/products/new/equipment/dozers/large-dozers/115080.html |
| Caterpillar Category | Large Dozers |
| Caterpillar Category Path | Products > Equipment > Dozers > Large Dozers > D10 |
| Caterpillar Product Family | equipment |
| Type | Planetary powershift |
| Caterpillar Product Page ID | 115080 |
| Emissions | U.S. EPA Tier 4 Final/EU Stage V |
| Operating Weight | 70 256 kg |
| Pump Type | Variable displacement piston |
| Weights — Note (1) | D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator. |
| Weights — Note (2) | D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes. |
| Ground Clearance | 725 mm |
| Track Gauge | 2550 mm |
| Sound | Operator Sound Pressure Level (ISO 6396:2008): 78 db(A) |
| Standards — Note (1) | The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. |
| Standards — Note (2) | The sound levels listed above include both measurement uncertainty and uncertainty due to production variation. |
| Shipping Weight | 50 684 kg |
| Length - Track on Ground | 3880 mm |
| Ground Contact Area | 4.74 m² |
| ROPS | Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008. |
| FOPS | Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II. |
| Height - Top of Stack | 4356 mm |
| Weight | 6445 kg |
| Shoe Type | Extreme Service (ES) |
| Width - Shoe | 610 mm |
| Shoes/Side | 44 |
| Grouser Height | 93 mm |
| Engine Power - Net SAE J1349/ISO 9249** - Forward | 449 kW |
| Pitch | 260 mm |
| Engine Power - Gross SAE J1995* - Forward | 471 kW |
| Track Rollers/Side | 8 |
| Engine Power - Gross SAE J1995* - Reverse | 597 kW |
| Number of Carrier Rollers | 1 per side (optional) |
| Engine Power - ISO 14396* - Forward | 462 kW |
| Sound (1) | Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A) |
| Engine Power - ISO 14396* - Reverse | 588 kW |
| Engine Power - Net SAE J1349/ISO 9249** - Reverse | 564 kW |
| Steering Type | Hydraulically Applied Multiple-Disc Steering Clutch |
| Standards — Note (3) | The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A). |
| Brake Type | Spring Applied Multiple- Disc Brake |
| Brake Diameter | 392 mm |
| Brake Count | 10 |
| Engine - U.S. EPA Tier 2 Equivalent — Engine Power - Net SAE J1349/ISO 9249** - Forward | 450 kW |
| Engine - U.S. EPA Tier 2 Equivalent — Engine Power - Net SAE J1349/ISO 9249** - Reverse | 538 kW |
| Engine - U.S. EPA Tier 2 Equivalent — Engine Power - Gross SAE J1995* - Reverse | 571 kW |
| Engine - U.S. EPA Tier 2 Equivalent — Engine Power - ISO 14396* - Forward | 464 kW |
| Engine - U.S. EPA Tier 2 Equivalent — Engine Power - ISO 14396* - Reverse | 564 kW |
| Engine - U.S. EPA Tier 2 Equivalent — Emissions | U.S. EPA Tier 2 Equivalent |
| Fuel Tank - Usable Volume | 1224 l |
| Fuel Tank - Total Volume | 1269 l |
| Pump Output - Implement | 424 L/min |
| Hydraulic Controls — Note (1) | Implement Pump output measured are 2,010 engine rpm and 7000 kPa (1,015 psi). |
| Final Drives (each) | 46 l |
| Fan Pump | 82 L/min |
| Hydraulic Controls — Note (2) | Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi). |
| Pivot Shaft Oil | 36 l |
| Tilt Cylinder Flow - Rod End Flow | 424 L/min |
| Hydraulic System Tank | 122 l |
| Tilt Cylinder Flow - Head End Flow | 240 L/min |
| Lift Cylinder Relief Valve Setting | 28 000 kPa |
| Tilt Cylinder Relief Valve Setting | 26 700 kPa |
| Ripper - Lift - Relief Valve Setting | 28 000 kPa |
| Ripper - Pitch - Relief Valve Setting | 28 000 kPa |
| Tank Capacity | 122 l |
| Cylinder Sizing - Blade Lift - Bore | 140 mm |
| 1.0 Forward | 4 km/h |
| Cylinder Sizing - Blade Tilt - Bore | 210 mm |
| 2.0 Forward | 7.2 km/h |
| Cylinder Sizing - Ripper Shank Lift - Bore | 209.6 mm |
| 3.0 Forward | 12.5 km/h |
| Cylinder Sizing - Ripper Shank Angle - Bore | 180 mm |
| 1.0 Reverse | 5.2 km/h |
| Cylinder Sizing - Blade Lift - Stroke | 1653 mm |
| 2.0 Reverse | 9 km/h |
| Cylinder Sizing - Blade Tilt - Stroke | 241 mm |
| 3.0 Reverse | 15.7 km/h |
| Cylinder Sizing - Ripper Shank Lift - Stroke | 535 mm |
| Cylinder Sizing - Ripper Shank Angle - Stroke | 660 mm |
| Hydraulic Controls — Note (3) | Electro-hydraulic pilot valves assist operations of ripper and dozer controls. |
| 1.5 Forward | 5.4 km/h |
| 2.5 Forward | 9.6 km/h |
| 1.5 Reverse | 6.7 km/h |
| 2.5 Reverse | 12.1 km/h |
| Transmission Clutch Diameter | 431.8 mm |
| 10SU ABR - Capacity (SAE J1265) | 18.5 m³ |
| 10SU ABR - Width (over end bits) | 4940 mm |
| 10SU ABR - Height | 2120 mm |
| 10SU ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry) | 507.47 mm |
| Maximum penetration force * (shank vertical) | 219 kN |
| 10SU ABR - Digging Depth - Blade Pitch: Nominal | 640.87 mm |
| Maximum penetration depth (standard tip) | 1504 mm |
| 10SU ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread) | 764.12 mm |
| 10SU ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry) | 1680 mm |
| Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole | 912 mm |
| 10SU ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread) | 1368 mm |
| 10SU ABR - Ground Clearance - Maximum Tilt LH | 1430 mm |
| 10SU ABR - Ground Clearance - Maximum Tilt RH | 1430 mm |
| Ripper - Single Shank — Note | Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank. |
| 10U ABR - Capacity (SAE J1265) | 22 m³ |
| Ripper - Single Shank, Deep Ripping — Maximum penetration force * (shank vertical) | 236 kN |
| 10U ABR - Width (over end bits) | 5260 mm |
| Ripper - Single Shank, Deep Ripping — Maximum penetration depth (standard tip) | 1988 mm |
| 10U ABR - Height | 2120 mm |
| 10U ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry) | 507.5 mm |
| 10U ABR - Digging Depth - Blade Pitch: Nominal | 640.9 mm |
| 10U ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread) | 764.1 mm |
| 10U ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry) | 1680 mm |
| 10U ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread) | 1368 mm |
| 10U ABR - Ground Clearance - Maximum Tilt LH | 1545 mm |
| 10U ABR - Ground Clearance - Maximum Tilt RH | 1545 mm |
| 10U ABR - Weights - Blade Weight* | 10 698 kg |
| 10U ABR - Weights - Total Operating Weight** (with blade and SS ripper) | 70 256 kg |
| Blades — Note (1) | Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees |
| Blades — Note (2) | *Does not include hydraulic controls but includes blade cylinders, pusharms. |
| Blades — Note (3) | **D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator. |
| Ripper - Single Shank, Deep Ripping — Weight | 6599 kg |
| Ripper - Single Shank, Deep Ripping — Note | Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank. |
| Width - Without Trunnions - 610 mm/24 in ES | 3311 mm |
| Width - Over Trunnions | 3759 mm |
| Height - FOPS Cab* | 4134 mm |
| Height - ROPS/Canopy* | 4406 mm |
| Dimensions (Approximate) — Note (1) | *Includes grouser height for total dimensions on hard surfaces. |
| Overall Length - Basic Tractor | 5324 mm |
| Length - With SU-Blade | 7416 mm |
| Length - With U-Blade | 7750 mm |
| Length - With Single-Shank Ripper | 7081 mm |
| Length - With Multi-Shank Ripper | 7241 mm |
| Overall Length - SU-Blade/SS Ripper | 9158 mm |
| Cooling System Refill – Tier 4 Final Engine | 175 l |
| Engine Crankcase Sump | 103 l |
| Power Train - Total Volume | 308 l |
| Power Train - Refill Volume | 283 l |
| Track Roller Frames (each) | 64 l |
| Datasheet URL | https://s7d2.scene7.com/is/content/Caterpillar/CM20221025-3118d-33912 |
منتجات مشابهة
معدات ثقيلة وآليات
Caterpillar
415 IL Industrial Loader
اطلب عرض سعر
Caterpillar
836 Landfill Compactor
اطلب عرض سعر
Caterpillar
CB10
اطلب عرض سعر
Caterpillar
CB16 Tandem Vibratory Roller
اطلب عرض سعر
Caterpillar
CB15 Tandem Vibratory Roller
اطلب عرض سعر
Caterpillar
CB8
اطلب عرض سعر
Caterpillar
CB7
اطلب عرض سعر
Caterpillar
CB13 Tandem Vibratory Roller
اطلب عرض سعر