Caterpillar

982 XE Wheel Loader

Name: 982 XE Wheel Loader
Brand: Caterpillar
SKU: CAT-130322

رقم القطعة: CAT-130322

لا يعرض أي بائع سعرًا لهذا المنتج بعد. أرسل طلبك وسنعود إليك بأفضل عرض.

اطلب عرض سعر

يكتمل الطلب في تطبيق Ohmva بعد تسجيل الدخول.

الوصف

982 XE Wheel Loader

المواصفات

Engine Model	Cat® C13
Displacement	12.5 l
Note (1)	The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
Note (2)	¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuelsup to: 20% biodiesel FAME (fatty acid methyl ester) 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or "Caterpillar Machine Fluids Recommendations" (SEBU6250) for details. While Caterpillar engines are compatible with these alternative fuels, some regions may not allow their use. Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. *Engines with no aftertreatment devices are compatible with higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).
Note (3)	Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to- liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel.
Forward - 1	6.2 km/h
Forward - 2	11.8 km/h
Forward - 3	20.9 km/h

كل المواصفات (81)

Forward - 4	39.5 km/h
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 1.600 kg (3.5 lb) of refrigerant, which has a CO2 equivalent of 2.288 metric tonnes (2.522 tons). - If equipped with R1234yf (Global Warming Potential = 0.501), the system contains 1.389 kg (3.1 lb) of refrigerant, which has a CO2 equivalent of .001 metric tonnes (1.10 tons).
Note	Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link™, open differential axles (front/rear), secondary steering, sound suppression, and a 6.1 m³ (8 yd³) general purpose bucket with BOCE.
Reverse - 1	7.1 km/h
Fuel Tank	426 l
Cooling System	52 l
Reverse - 2	13.5 km/h
DEF Tank	21 l
Transmission	77 l
Model	982 XE
Product Page	https://www.cat.com/en_US/products/new/equipment/wheel-loaders/medium-wheel-loaders/130322.html
Caterpillar Category	Medium Wheel Loaders
Caterpillar Category Path	Products > Equipment > Wheel Loaders > Medium Wheel Loaders > 982 XE
Caterpillar Product Family	equipment
Caterpillar Product Page ID	130322
Emissions	Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
Operating Weight	35510 kg
Breakout Force	262 kN
Transmission — Note	Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius.
Hydraulic Tank	153 l
Ground Clearance	428 mm
Biodiesel Capability	Up to B20¹
Wheel Base	3800 mm
Operating Specifications — Note (2)	Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Crankcase	37 l
Height - Top of ROPS	3801 mm
Operating Specifications — Note (1)	For a machine configuration as defined under “Weight.”
Reverse - 3	28 km/h
Hinge Pin Height at Maximum Lift	4741 mm
Operator Sound Pressure Level - ISO 6396:2008	70 dB(A)
Sound — Note (1)	¹Including countries that adopt the EU and UK Directives.
Exterior Sound Power Level - ISO 6395:2008	107 dB(A)
Differential - Final Drives - Rear	92 l
Operator Sound Pressure Level - ISO 6396:2008 ¹	70 dB(A)
Differential - Final Drives - Front	92 l
Sound — Note (2)	²Exterior Sound Power Level - European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701.
Static Tipping Load - Full 40° Turn - With Tire Deflection	21110 kg
Static Tipping Load - Full 40° Turn - No Tire Deflection	22418 kg
Implement System - Maximum Operating Pressure	34300 kPa
Hydraulic Cycle Time - Total	10.1 s
Height - Top of Hood	3036 mm
Engine Power @ 1,700 rpm – ISO 14396:2002	322 kW
Overall Length - Without Bucket	8597 mm
Hinge Pin Height at Carry Height	791 mm
Gross Power @ 1,700 rpm – SAE J1995:2014	325 kW
Lift Arm Clearance at Maximum Lift	3902 mm
Rack Back - Maximum Lift	57 °
Gross Torque @ 1,200 rpm – SAE J1995:2014	2218 N·m
Rack Back - Carry Height	48 °
Width over Tires (Loaded)	3471 mm
Tread Width	2540 mm
Dimensions - Standard Lift — Note	All dimensions are approximate and based on machine equipped with 6.1 m³ (8 yd³) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires.
Dimensions - High Lift — Overall Length - Without Bucket	9104 mm
Dimensions - High Lift — Hinge Pin Height at Carry Height	896 mm
Dimensions - High Lift — Hinge Pin Height at Maximum Lift	5150 mm
Dimensions - High Lift — Lift Arm Clearance at Maximum Lift	4069 mm
Dimensions - High Lift — Rack Back - Maximum Lift	56 °
Dimensions - High Lift — Note	All dimensions are approximate and based on machine equipped with 6.1 m³ (8 yd³) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires.
Dimensions - High Lift — Rack Back - Carry Height	49 °
Engine Torque - 1,200 rpm ISO 14396:2002	2197 N·m
Gross Torque - 1,200 rpm SAE J1995:2014	2218 hp
Engine Torque @ 1,200 rpm – ISO 14396:2002	2197 N·m
Engine — Displacement	12.5L
Engine Power - 1,700 rpm ISO 14396:2002	322 kW
Engine — Engine Power - 1,700 rpm ISO 14396:2002	438 hp (metric)
Gross Power - 1,700 rpm SAE J1995:2014	325 kW
Engine — Gross Power - 1,700 rpm SAE J1995:2014	442 hp (metric)
Net Power - 1,700 rpm ISO 9249:2007, SAE J1349:2011	301 kW
Engine — Net Power - 1,700 rpm ISO 9249:2007, SAE J1349:2011	409 hp (metric)
Net Torque - 1,100 rpm ISO 9249:2007, SAE J1349:2011	2054 N·m
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011	2054 N·m
Engine Power - 1,700 rpm ISO 14396:2002 (2)	438 hp (metric)
Datasheet URL	https://s7d2.scene7.com/is/content/Caterpillar/CM20251204-fed26-11e95