Caterpillar

966 Wheel Loader

Name: 966 Wheel Loader
Brand: Caterpillar
SKU: CAT-130311

رقم القطعة: CAT-130311

لا يعرض أي بائع سعرًا لهذا المنتج بعد. أرسل طلبك وسنعود إليك بأفضل عرض.

اطلب عرض سعر

يكتمل الطلب في تطبيق Ohmva بعد تسجيل الدخول.

الوصف

966 Wheel Loader

المواصفات

Engine Model	Cat® C9.3B
Displacement	9.3 l
Note (1)	¹Including countries that adopt the EU and UK Directives.
Note (2)	¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuelsup to: 20% biodiesel FAME (fatty acid methyl ester) 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or "Caterpillar Machine Fluids Recommendations" (SEBU6250) for details. While Caterpillar engines are compatible with these alternative fuels, some regions may not allow their use. Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. *Engines with no aftertreatment devices are compatible with higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).
Note (3)	Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to- liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel.
Forward - 1	6.7 km/h
Forward - 2	13.5 km/h
Forward - 3	24.2 km/h

كل المواصفات (86)

Forward - 4	39.5 km/h
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 1.600 kg (3.5 lb) of refrigerant, which has a CO2 equivalent of 2.288 metric tonnes (2.522 tons). - If equipped with R1234yf (Global Warming Potential = 0.501), the system contains 1.389 kg (3.1 lb) of refrigerant, which has a CO2 equivalent of .001 metric tonnes (1.10 tons).
Note	Weight based on a machine configuration with Z-bar linkage, Bridgestone 26.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link™, front manual differential/open rear axles, powertrain guard, secondary steering, sound suppression, and a 4.2 m³ (5.5 yd³) general purpose bucket with BOCE.
Reverse - 1	7.3 km/h
Fuel Tank	303 l
Cooling System	66 l
Reverse - 2	14.8 km/h
DEF Tank	26 l
Transmission	58.5 l
Model	966
Product Page	https://www.cat.com/en_US/products/new/equipment/wheel-loaders/medium-wheel-loaders/130311.html
Caterpillar Category	Medium Wheel Loaders
Caterpillar Category Path	Products > Equipment > Wheel Loaders > Medium Wheel Loaders > 966
Caterpillar Product Family	equipment
Caterpillar Product Page ID	130311
Emissions	Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards.
Operating Weight	23196 kg
Breakout Force	174 kN
Transmission — Note	Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius.
Hydraulic Tank	114 l
Ground Clearance	424 mm
Biodiesel Capability	Up to B20¹
Wheel Base	3550 mm
Operating Specifications — Note	For a machine configuration as defined under “Weight.”
Crankcase	23 l
Height - Top of ROPS	3593 mm
Operating Specifications — Note (1)	Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Reverse - 3	26.6 km/h
Reverse - 4	39.5 km/h
Hinge Pin Height at Maximum Lift	4245 mm
Operator Sound Pressure Level - ISO 6396:2008	70 dB(A)
Exterior Sound Power Level - ISO 6395:2008	108 dB(A)
Operator Sound Pressure Level - ISO 6396:2008 ¹	69 dB(A)
Differential - Final Drives - Front	57 l
Sound — Note (2)	²Exterior Sound Power Level - European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701.
Implement System - Maximum Operating Pressure	31000 kPa
Hydraulic Cycle Time - Total	10.1 s
Height - Top of Hood	2850 mm
Overall Length - Without Bucket	7399 mm
Hinge Pin Height at Carry Height	635 mm
Lift Arm Clearance at Maximum Lift	3687 mm
Rack Back - Maximum Lift	62 °
Gross Torque @ 1,200 rpm – SAE J1995:2014	1799 N·m
Rack Back - Carry Height	50 °
Width over Tires (Loaded)	3012 mm
Tread Width	2230 mm
Dimensions - Standard Lift — Note	All dimensions are approximate and based on machine equipped with 4.2 m³ (5.5 yd³) general purpose bucket with BOCE and Bridgestone 26.5R25 VJT L3 radial tires.
Dimensions - High Lift — Overall Length - Without Bucket	8069 mm
Dimensions - High Lift — Hinge Pin Height at Carry Height	782 mm
Dimensions - High Lift — Hinge Pin Height at Maximum Lift	4804 mm
Dimensions - High Lift — Lift Arm Clearance at Maximum Lift	4183 mm
Dimensions - High Lift — Rack Back - Maximum Lift	71 °
Rack Back at Ground	39 degrees
Dimensions - High Lift — Note	All dimensions are approximate and based on machine equipped with 4.2 m³ (5.5 yd³) general purpose bucket with BOCE and Bridgestone 26.5R25 VJT L3 radial tires.
Dimensions - High Lift — Rack Back - Carry Height	49 °
Static Tipping Load - Full 37° Turn - No Tire Deflection	15981 kg
Engine Power - 1,600 rpm ISO 14396:2002	239 kW
Engine — Engine Power - 1,600 rpm ISO 14396:2002	325 hp (metric)
Gross Power - 1,600 rpm SAE J1995:2014	242 kW
Engine — Gross Power - 1,600 rpm SAE J1995:2014	329 hp (metric)
Net Power - 1,600 rpm ISO 9249:2007, SAE J1349:2011	222 kW
Engine — Net Power - 1,600 rpm ISO 9249:2007, SAE J1349:2011	302 hp (metric)
Engine Torque - 1,200 rpm ISO 14396:2002	1781 N·m
Gross Torque - 1,200 rpm SAE J1995:2014	1799 N·m
Net Torque - 1,200 rpm ISO 9249:2007, SAE J1349:2011	1702 N·m
Engine Torque @ 1,200 rpm – ISO 14396:2002	1781 N·m
Engine — Displacement	9.3 L
With Cooling Fan Speed at Maximum Value - Note	Distance of 15 m (49.2 ft), moving forward in second gear ratio.
Static Tipping Load - Full 37° Turn	14849 kg
Implement System - Maximum Pump Output at 2,275 rpm	373 L/min
Hydraulic System — Hydraulic Cycle Time - Total	10.1 seconds
Dimensions - Standard Lift — Rack Back - Maximum Lift	62 degrees
Dimensions - Standard Lift — Rack Back - Carry Height	50 degrees
Dimensions - High Lift — Rack Back at Ground	37 degrees
Rack Back - Carry Height (2)	49 degrees
Rack Back - Maximum Lift (2)	71 degrees
Engine Power - 1,600 rpm ISO 14396:2002 (2)	325 hp (metric)
Datasheet URL	https://s7d2.scene7.com/is/content/Caterpillar/CM20251201-8d9f7-ecdff