226D3 Skid Steer Loader

Name: 226D3 Skid Steer Loader
Brand: Caterpillar

لا يعرض أي بائع سعرًا لهذا المنتج بعد. أرسل طلبك وسنعود إليك بأفضل عرض.

اطلب عرض سعر

يكتمل الطلب في تطبيق Ohmva بعد تسجيل الدخول.

الوصف

226D3 Skid Steer Loader

المواصفات

Engine Model	Cat C2.2 CRDI
Gross Power - SAE J1995:2014	50.1 kW
Bore	84 mm
Stroke	100 mm
Displacement	2.2 l
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)	**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (3)	***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

كل المواصفات (62)

Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Note	* Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Fuel Tank	57 l
Cooling System	12 l
Hydraulic System	45 l
Engine Crankcase	10 l
Model	226D3
Product Page	https://www.cat.com/en_US/products/new/equipment/skid-steer-and-compact-track-loaders/skid-steer-loaders/15970471.html
Caterpillar Category	Skid Steer Loaders
Caterpillar Category Path	Products > Equipment > Skid Steer and Compact Track Loaders > Skid Steer Loaders > 226D3
Caterpillar Product Family	equipment
Caterpillar Product Page ID	15970471
Operating Weight	2653 kg
Hydraulic Tank	34 l
Ground Clearance	175 mm
Net Power - ISO 9249	49.6 kW
Wheel Base	1054 mm
Height - Top of Cab	2028 mm
Peak Torque - 1,500 rpm - SAE J1995	208 N·m
Net Power - SAE 1349	49.1 kW
Tipping Load	1410 kg
Breakout Force - Tilt Cylinder	1781 kg
Rated Operating Capacity with Optional Counterweight	750 kg
Departure Angle	27.9°
Length - With Bucket on Ground	3234 mm
Maximum Dump Angle	46.7°
Length - Without Bucket	2524 mm
Maximum Reach - With Arms Parallel to Ground	1288 mm
Turning Radius from Center - Coupler	1104 mm
Maximum Overall Height	3652 mm
Turning Radius from Center - Bucket	1977 mm
Bucket Pin Height - Carry Position	215 mm
Rack Back Angle - Maximum Height	88.9°
Turning Radius from Center - Machine Rear	1513 mm
Reach - Maximum Lift/Dump	533 mm
Bucket Pin Height - Maximum Lift	2818 mm
Clearance at Maximum Lift and Dump	2077 mm
ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 Level I
Travel Speed - Forward or Reverse - One Speed	12.3 km/h
Hydraulic Flow - Standard - Loader Hydraulic Pressure	23000 kPa
Hydraulic Flow - Standard - Loader Hydraulic Flow	69 L/min
Hydraulic Flow - Standard - Hydraulic Power (Calculated)	26.5 kW
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)	38 kW
Outside Cab***	102 dB(A)
Inside Cab**	83 dB(A)
Rated Operating Capacity	705 kg
Vehicle Width over Tires	1497 mm
Bumper Overhang - Behind Rear Axle	8944 mm
Chain Box - Each Side	7 l
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure	23000 kPa
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow	99 L/min
Travel Speed - Forward or Reverse - Two Speed Option	17.8 km/h
Datasheet URL	https://s7d2.scene7.com/is/content/Caterpillar/CM20190508-7c28e-c5072