Caterpillar

796 AC Electric Drive Mining Truck

Name: 796 AC Electric Drive Mining Truck
Brand: Caterpillar

لا يعرض أي بائع سعرًا لهذا المنتج بعد. أرسل طلبك وسنعود إليك بأفضل عرض.

اطلب عرض سعر

يكتمل الطلب في تطبيق Ohmva بعد تسجيل الدخول.

الوصف

796 AC Electric Drive Mining Truck

المواصفات

Engine Model	Cat® C175-16
Bore	175 mm
Stroke	220 mm
Displacement	85 l
Note (1)	Consult your tire manufacturer for maximum tire load.
Note (2)	Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
Note (3)	Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations
Heaped (SAE 2:1)	186-237 m³ (243-310 yd³)

كل المواصفات (102)

Struck	97-153 m³ (127-200 yd³)
Air Conditioning	HFC - 134A refrigerant: 21,600 Btu/h
Note	Turning Diameter (ISO 7457:1997)
Fuel Tank	4922 l
Cooling System	799 l
Front Axle - Empty	47 %
Rear Axle - Empty	53 %
Final Drive - Each	254 l
Model	796 AC
Front Axle - Loaded	33 %
Product Page	https://www.cat.com/en_US/products/new/equipment/off-highway-trucks/mining-trucks/15970072.html
Caterpillar Category	Mining Trucks
Rear Axle - Loaded	67 %
Caterpillar Category Path	Products > Equipment > Off-Highway Trucks > Mining Trucks > 796 AC
Caterpillar Product Family	equipment
Type	Twin, two-stage hydraulic cylinders with snubbing valve.
Caterpillar Product Page ID	15970072
Controls	Cat IGBT Inverter Technology, air cooled, pressurized cabinet with filtration
Hydraulic Tank	1121 l
Rated Speed	1800 r/min
Hydraulic System - Including Tank	1458 l
Engine — Note (1)	Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
Engine — Note (2)	U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.
Wheel Base	6674 mm
Gross Power - SAE J1995	2610 kW
Net Power - SAE J1349	2539 kW
Grease Tank	41 kg
Parking Brake	Four-corner, Multi-disc, Spring Applied, Hydraulically Released
Nominal Rated Payload	327 t
Emissions Rating	Fuel Optimized
Engine — Note (3)	Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp
Rated Gross Machine Weight	576072 kg
Chassis Weight	203398 kg
Top Speed - Loaded	64 km/h
Pump Flow - High Idle	964 L/min
Total Reduction Ratio	35:01:00
Relief Valve Setting - Raise	20884 kPa
Body Raise Time - High Idle	21 s
Standard Tires	59/80 R63
Body Weight Range	38 833 – 42 907 kg (85,611 – 94,594 lb)
Body Lower Time - Float	22 s
Rims	44" x 63"
Fuel Tank (Tier 4)	4542 l
Body Power Down- High Idle	17.5 s
Tires — Note (1)	Quick Change Rims optional.
Suspension — Type	Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
Diesel Exhaust Fluid Tank	378 l
Tires — Note (2)	Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
Effective Cylinder Stroke - Front	102.1 ml
Crankcase	310 l
Generator/Alternator	Cat brushless, engine mounted, dual bearing
Service Brakes	Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
Effective Cylinder Stroke - Rear	50.5 mm
Front Wheels - Each	28 l
Wheel Motor	Cat AC induction, rear axle mounted
Front Wet Disc Brake Surface Area	131473 cm²
Rear axle - Oscillation	+/- 5.32 degrees
Service Refill Capacities — Note (1)	DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option
Rear - Wet Disc Brake Surface Area	198388 cm²
Steer Angle	39 °
Standards	Service and Secondary: ISO 3450:2011
Steering Standards	ISO 5010:2019
Load Brake	Rear service brakes
Turning Diameter - Front	32.4 m
Dynamic Retarding Power - Continuous	4086 kW
AC Drive System — Cooling System	Cat variable speed, hydraulically driven cooling system
Braking System — Note	Anti-Lock Brake System (ABS) optional with CMD package
Weight Distributions - Approximate — Note	Weight distributions optimized with Cat body.
Capacity - HE Body - 100% fill factor — Note	Consult your local Cat dealer for body recommendations.
Heater / Defroster	24600 Btu/h
Body Hoists — Note (1)	Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages.
ROPS Standards (1)	ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
Body Hoists — Note (2)	Power raise in both stages; power down capability in both stages.
FOPS Standards	FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.
Body Hoists — Note (3)	Automatic body-lower modulation reduces impact on frame.
Cab — Note	Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning.
Height - Top of ROPS	6720 mm
Sound Standards	The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008.
Overall Length	15679 mm
Rear Axle - Tail	4898 mm
Overall Height - Body Raised	14890 mm
Dump Clearance - Empty	1744 mm
Loading Height - Empty	7271 mm
Centerline Front Tire Width	7028 mm
Front Axle Clearance - Loaded	855 mm
Front Canopy Height - Empty	7928 mm
Overall Canopy Width (with rock deflectors)	10103 mm
Outside Body/Canopy Width (without rock deflectors)	9639 mm
Inside Body Width	8973 mm
Centerline of Rear Dual Tire Width	5943 mm
Rear Axle Clearance - Loaded	854 mm
Overall Tire Width - Empty	9226 mm
Dimensions (Approximate) — Note	Dimensions listed includes canopy deflectors
Datasheet URL	https://s7d2.scene7.com/is/content/Caterpillar/CM20190514-28833-50502