Caterpillar

MH3050 Wheel Material Handler

Name: MH3050 Wheel Material Handler
Brand: Caterpillar
SKU: CAT-126824

رقم القطعة: CAT-126824

لا يعرض أي بائع سعرًا لهذا المنتج بعد. أرسل طلبك وسنعود إليك بأفضل عرض.

اطلب عرض سعر

يكتمل الطلب في تطبيق Ohmva بعد تسجيل الدخول.

الوصف

MH3050 Wheel Material Handler

المواصفات

Engine Model	Cat® C9.3B
Bore	115 mm
Stroke	149 mm
Displacement	9.3 l
Note (1)	Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,900 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)	¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. While Caterpillar engines are compatible with these alternative fuels, some regions may not allow their use. Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. **Engines with no aftertreatment devices are compatible with higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).
Note	Operating weight varies depending on configuration.
Cooling System	40 l

كل المواصفات (59)

Final Drive - Each	4.5 l
Model	MH3050
Product Page	https://www.cat.com/en_US/products/new/equipment/material-handlers/wheel-material-handlers/126824.html
Caterpillar Category	Wheel Material Handlers
Caterpillar Category Path	Products > Equipment > Material Handlers > Wheel Material Handlers > MH3050
Caterpillar Product Family	equipment
Caterpillar Product Page ID	126824
Fuel Tank Capacity	600 l
Maximum Travel Speed	18 km/h
Emissions	Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Operating Weight	50000 kg
Recyclability	90%
Hydraulic Tank	186 l
Engine Oil	32 l
Diesel Exhaust Fluid (DEF) Tank	80 l
Maximum Reach	18060 mm
Drawbar Pull	182 kN
Ground Clearance	310 mm
Tail Swing Radius	3520 mm
Net Power - ISO 9249	258 kW
Net Power - ISO 9249 (DIN)	351 hp (metric)
Engine Power - ISO 14396 (DIN)	352 hp (metric)
Biodiesel Capability	Up to B20¹
Boom	MH 10.95 m (35'11")
Stick	Industrial 8.3 m (27'3")
Maximum Pressure - Travel	35000 kPa
Maximum Pressure - Swing	29400 kPa
Swing Speed	7 r/min
Maximum Swing Torque	143 kN·m
Hydraulic System - Including Tank	423 l
Shipping Length	14840 mm
Counterweight Clearance	1630 mm
Undercarriage Length	6750 mm
Wheel Base	3400 mm
Air Conditioning System — Note (1)	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. If equipped with R134a (Global Warming Potential = 1430), the system contains 1.09 kg (2.4 lb) of refrigerant which has a CO2 equivalent of 1.559 metric tonnes (1.718 tons). If equipped with R1234yf (Global Warming Potential = 0.5), the system contains 1.09 kg (2.4 lb) of refrigerant which has a CO2 equivalent of 0.001 metric tonnes (0.001 tons).
Maximum Height	19030 mm
Maximum Depth	5760 mm
Boom Pin Height	13470 mm
Maximum Pressure - Implements	31000 kPa
Cab Height-Lowered with OPG	3720 mm
Cab Height-Raised	6260 mm
Cab Height-Raised with OPG	6310 mm
Engine Power - Maximum - ISO 14396	259 kW
Minimum Dump Height	5530 mm
Maximum Gradeability	41%
Rear Axle - Housing (Differential)	40 l
Powershift Transmission	3 l
Machine Length	6850 mm
Cab Height- Lowered	3670 mm
Shipping Width	3490 mm
Datasheet URL	https://s7d2.scene7.com/is/content/Caterpillar/CM20250401-7196e-e27fe