LED safety lamp with automatic operation
رقم القطعة: BT-H4381
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع افتح تطبيق Ohmva.
الوصف
LED safety lamp with automatic operation
المواصفات
| Operating / setting temperature (Min-Max) | -5-45 °C |
|---|---|
| Storage temperature (Min-Max) | -10-65 °C |
| Voltage type | AC |
| Nominal voltage (Min-Max) | 230-250 V |
| Frequency (Min-Max) | 50-50 Hz |
| Standby consumption | 138 mA |
| Halogen free | Yes |
| Cable nature for connection | Flexible |
| Fitted with rainproof plate protection | No |
| With complemantary luminous signal | No |
| Vertical fixing center distance (Min-Max) | 4.5-4.5 mm |
| Control mode | Wired |
| Connected object | No |
| Source URL | https://www.bticino.com/products/bt-h4381 |
| Part Number | H4381 |
| BTicino Category | Emergency lamps |
| BTicino Taxonomy Path | Switches, sockets and wiring devices > Axolute premium range > Emergency and signalization lamps > Emergency lamps |
| BTicino Series | Axolute |
| Obsolete | No |
| New | No |
| Datasheet URL | https://assets.legrand.com/pim/NP-FT-GT/LE10049AB.pdf |
| Antimicrobial treatment | No |
| Width | 22.3 mm |
| Length | 50 mm |
| Suitable for ceiling mounting | No |
| Material cover | Plastic, opal |
| Housing material | Plastic |
| Built-in width | 22.3 mm |
| Cable support | Screw cable clamp |
| Maximum Input cable diameter | 2.5 mm |
| Housing colour | Grey |
| Suitable for wall mounting | Yes |
| Mandatory neutral | No |
| With light source | Yes |
| Lamp holder | Other |
| Supplied remote control | No |
| Lamp type | LED not exchangeable |
| Protection class according to IEC 61140 | None |
| Luminous flux in emergency mode | 248 lm |
| Rated luminous flux according to IEC 62722-2- 1 (Min-Max) | 248-248 lm |
| Max. system power | 0.1 W |
| Height/depth | 49.2 mm |
| Built-in height/depth | 49.2 mm |
| Connectable conductor cross section (Min-Max) | 1.5-2.5 mm² |
| Nominal current (Min-Max) | 15-25 mA |
| Built-in length | 45 mm |
| Dimming phase cut-on (leading edge) | No |
| Dimming phase cut-off (trailing edge) | No |
| With movement sensor | No |
| With light sensor | Yes |
| With socket outlet | No |
| Type of control gear | LED operating device voltage-controlled |
| With control gear | No |
| Suitable for lamp power (Min-Max) | 0.1-0.1 W |
| Colour of light | White |
| Suitable for suspended mounting | No |
| Suitable for built-in mounting | Yes |
| Suitable for surface mounting | No |
| Suitable for light line configuration | No |
| Suitable for workplace according to EN 12464-1 | No |
| Type of grid | Matt |
| Dimmable | No |
| Dimming 0-10 V | No |
| Dimming 1-10 V | No |
| Dimming DALI | No |
| Dimming DMX | No |
| Dimming DSI | No |
| Dimming manufacturer's proprietary system | No |
| Dimming mains voltage modulation | No |
| Dimming programmable | No |
| Dimming potentiometer (integrated) | No |
| Dimming RF | No |
| Dimming Touch and Dim | No |
| Dimming Zigbee | No |
| Dimming with push-button | No |
| Light distribution | Symmetric |
| Beam angle | > 80° - Extreme wide beam |
| Light outlet | Direct |
| Degree of protection (IP), rear side | IP41 |
| Luminaire with limited surface temperature, sign "D“ according to EN 60598-2-24 | No |
| Rated ambient temperature according to IEC 62722-2-1 (Min-Max) | -5-48 °C |
| Suitable for emergency lighting | Yes |
| Covering of the luminaire with thermally insulating material possible | No |
| With air slots | Yes |
| Luminaire efficacy (Min-Max) | 0-0 lm/W |
| Colour temperature (Min-Max) | 4000-5500 K |
| Colour rendering index CRI | 80-89 |
| Luminous intensity (Min-Max) | 0-0 cd |